Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Barrel-Stave Hammock: Notched Staves Held by Ropes Twined Round Their Ends (Boy Mechanic, 1913)
A hammock of barrel staves, "more comfortable than one would think", from The Boy Mechanic (1913): smooth staves notched at the ends and strung side by side on ropes, which are gathered and tied to two trees. It can be left out in the rain.
The book gives no sizes: the length of the staves sets the width of the bed.
Byrjandi
About 2 hours
Leiðbeiningar
1
1
Read The Boy Mechanic
Read The Boy Mechanic
"A hammock made of barrel staves is more comfortable than one would think, considering the nature of the material employed in making it."
2
2
Choose and smooth the staves
Choose and smooth the staves
Select good, smooth barrel staves, enough laid side by side to make the hammock as long as you are tall (our rule). Sandpaper them thoroughly; he says this makes a great improvement.
Efni fyrir þetta skref:
Tunnustafur12 stykki
Sandpappír1 stykki3
3
Notch the ends
Notch the ends
Cut half circles out of the edges of each stave near both ends, as at AA in his drawing, so the ropes lie in them. Mark them at the same place on every stave so the staves line up. Boring a hole on the edge line and sawing it in half is our way of cutting them.
Nauðsynleg verkfæri:
Blýantur
Handsveifarbor með bor
Handsög4
4
String the staves
String the staves
Lay the staves side by side and pass the ropes round their ends through the notches, twining them between the staves as at B, at both ends. The weight then hangs on four ropes at each end, so small ropes such as clothes lines will do.
Efni fyrir þetta skref:
Þvottasnúra1 stykki5
5
Hang it
Hang it
Gather the ropes at each end and tie them round two trees or posts, leaving the hammock a little slack so the bed curves as in the drawing.
Efni fyrir þetta skref:
Þvottasnúra1 stykki6
6
Troubleshooting
Troubleshooting
Hammock troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From **The Boy Mechanic**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913, p. 75, "Barrel-Stave Hammock", sent in by H.G.M. of St. Louis (Project Gutenberg 12655). He gives no sizes or number of staves; the count, the length rule and the way of cutting the notches are ours.
Efni
3- 12 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.