Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Self-Righting Jumping Hurdle: Off-Centre Pivoted Swing Between Two Standards (Boy Mechanic, 1915)
C. C. Fraser's hurdle from The Boy Mechanic, Book 2 (1915): a 36 by 18 in swing hung on long nails slightly off centre between two standards joined by a reach. It turns at the slightest touch of the jumper's foot and rights itself again.
Byrjandi
About 2 hours
Leiðbeiningar
1
1
His cutting list in centimetres
His cutting list in centimetres
Hleð Jupyter-vinnubók…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
"The hurdle consists of two standards, a reach, and a swing."
3
3
Make the swing
Make the swing
Nail four pieces about 7/8 in thick and 1-1/2 in wide into a rectangle: two 36 in long and two 18 in long.
Efni fyrir þetta skref:
Furuborð1 stykki
Naglar1 stykkiNauðsynleg verkfæri:
Handsög
Hamar
Málband
Blýantur4
4
Make the standards and reach
Make the standards and reach
Make each standard of three pieces 7/8 in thick, 3 in wide and 18 in long, nailed firmly together as in his figure, and join their bases with a reach of the same stuff, 36 in long.
Efni fyrir þetta skref:
Furuborð1 stykkiNaglar1 stykkiNauðsynleg verkfæri:
HandsögHamarMálband5
5
Hang the swing
Hang the swing
Bore a hole in each standard large enough for a long nail to turn freely but too small for its head to pass, and hang the swing on the nails at its ends, slightly off centre, so it swings at a touch and rights itself.
Efni fyrir þetta skref:
Naglar1 stykkiNauðsynleg verkfæri:
HandborHamar6
6
Troubleshooting
Troubleshooting
Hurdle troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "How to Make a Hurdle" by C. C. Fraser, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 145). How far off centre the pivots go is not given. The tools and metric figures are ours.
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.