LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Brick Blacksmith's Forge with a Bottom-Blast Tuyere
A forge is a hearth with a bowl for the fire and an opening in its bottom, the tuyere, through which the blast of air is forced. One smith's forge of the 1880s was two feet four inches high and four feet square, built of brick and stone, with a 12-inch chimney flue, the tuyere iron set four inches below the surface and the forge hollow underneath so the fire could be dumped and the ashes cleared. Advice of the same time: keep the tuyere's centre at least eighteen inches from the back wall and the working side, set its top four to six inches below the hearth (deeper for heavy work), and leave a recess in the back wall at least 8 inches deep, 24 high and 24 wide. The blast came from a blower or bellows.
Miðlungs
Several days
Leiðbeiningar
1
1
Build the base
Build the base
Build the hearth of brick and stone, about two feet four inches high and four feet square (one smith's size), hollow underneath with an opening for the ash.
Efni fyrir þetta skref:
Brenndir leirsteinar1 as required
Steinar1 as requiredNauðsynleg verkfæri:
Múrskeið2
2
Back wall and recess
Back wall and recess
Raise the back wall and chimney with a 12-inch flue; leave a recess at least 8 in deep, 24 in high and 24 in wide behind the fire.
Efni fyrir þetta skref:
Reykrör (skorsteinn)1 stykkiNauðsynleg verkfæri:
Múrskeið3
3
Set the tuyere
Set the tuyere
Set the tuyere with its centre at least 18 in from the back wall and the working side, its top 4–6 in below the hearth surface.
Efni fyrir þetta skref:
Blásturstútur smiðju1 stykki4
4
Blast
Blast
Connect the blower or bellows to the tuyere pipe, with a way to open it underneath and clear cinders.
Nauðsynleg verkfæri:
Handsnúinn smiðjublásariEfni
4- 1 as requiredStaðgengill
- 1 as requiredStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.