LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Channel-Ring Dasher Churn: A Hollow Column of Cream Traps Air at Every Stroke
Moses D. Wells of Morgantown, Virginia, received US 13,281, dated 17 July 1855, for a dasher of a central disk and a ring "separated by a passage or channel whose sides incline inward and upward, toward the dasher shaft." Each down stroke throws up a hollow column of cream that closes over air.
This rung prints the dasher and lever bracket, builds the churn and makes butter.
Byrjandi
About 3 hours, plus printing
Leiðbeiningar
1
1
The channel
The channel
Hleð Jupyter-vinnubók…
2
2
An up-and-down dasher before it
An up-and-down dasher before it
Webber forces cream up between two cones; Wells forces it up a channel.
3
3
Read US 13,281
Read US 13,281
"Its descent causes a rush of cream through the channel e, which current taking the direction of the sides of the channel, forms a continuous hollow column of cream, running upward toward the shaft c, where it meets and incloses the body of air which has been drawn down by the disk portion of the dasher."
4
4
Print the parts
Print the parts
Print the dasher and the lever bracket. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Efni fyrir þetta skref:
PETG-þráður1 stykkiNauðsynleg verkfæri:
FDM-þrívíddarprentari5
5
Print the dasher
6
6
Print the lever bracket
Print the lever bracket
The lever bracket, printed as step 4 describes.
7
7
Churn and dasher
Churn and dasher
Use a straight-sided round food-grade container about 190 mm across inside. Glue a 10 mm square hardwood shaft into the dasher and pass it up through a hole in the lid.
Efni fyrir þetta skref:
Geymslubox í matvælaflokki1 stykki
Harðviðartappar1 stykki
Tveggja þátta epoxý1 stykkiNauðsynleg verkfæri:
Handsög
Hleðslubor
Borasett8
8
The lever
The lever
Screw the bracket to the churn's side. Pin a pine link in it, pin a pine lever to the link's top, and pin the lever's short end to the shaft.
Efni fyrir þetta skref:
Furuborð1 stykki
Kringlótt stöng úr deigu stáli1 stykki
Tréskrúfa #8 x 1"1 stykkiNauðsynleg verkfæri:
HandsögHleðslubor
Skrúfjárnasett9
9
The build in 3D
The build in 3D
FreeCAD model of this build: the churn cut away to show the disk-and-ring dasher with its sloping channel, the shaft and the lever on its link and bracket.
10
10
Churn
Churn
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres. Work the lever so the dasher lifts clear of the cream each stroke; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Efni fyrir þetta skref:
Rjómi2000 ml
Gróft sjávarsalt1 stykki
Vatn1 stykkiNauðsynleg verkfæri:
Hitamælir með nema sem situr í
Skeiðklukka
Stafræn eldhúsvog
Stór hrærskál úr ryðfríu stáli11
11
Troubleshooting
Troubleshooting
Channel-ring dasher troubleshooting.
Flow
Loading...
12
12
History and honest limits
History and honest limits
**Moses D. Wells** of Morgantown, Monongalia County, Virginia, US 13,281, 17 July 1855. He claimed the dasher with an inclined continuous channel for the upward flow of a hollow column of cream. A container and printed parts stand in for his churn. FDM prints hold food in their layer lines, so wash well and replace when worn.
Efni
10- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 2000 mlStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Nauðsynleg verkfæri
9- Staðgengill
- Staðgengill
- Hleðslubor3% þóknunMagento Legacy Storeships internationallyStaðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Hönnunarskrár
3Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
Buoyant Cone Dasher Churn: A Flanged Cone in a Cone, Pressed Down and Floating Back Up
eftir TheChef
MATUR OG DRYKKUR
28
0
0
0
0
0
Valved Hollow-Staff Plunger Churn: A Valve at the Top, Air Forced Out at the Foot
eftir TheChef
MATUR OG DRYKKUR
37
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation
eftir TheChef
HANDVERK
54
0
0
0
0
0
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.