LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Continuous Glass Fibre Strand Drawn from a Platinum Bushing
Glass fibre for cloth is not spun like wool: hundreds of fine filaments are pulled at once from small nozzles in a hot platinum box and wound up as one strand. This is the method of Slayter and Thomas's Owens-Corning patent (US 2,234,986, 1941): an electrically heated platinum-rhodium thimble melts glass cullet, a blower freezes each filament just below its nozzle, a size is put on, and a drum pulls and winds the strand. The faster the drum, the finer the fibre.
The picture: a glass fibre roving (NoiseD, Wikimedia Commons, CC BY-SA 3.0).
Lengra kominn
1 day
Leiðbeiningar
1
1
Charge the bushing with cullet
Charge the bushing with cullet
Fill the platinum-rhodium thimble (90 % platinum, 10 % rhodium) with broken soda-lime glass. Its floor has rows of staggered nipples .02–.08 in (0.5–2 mm) wide; .04 in (1 mm) is best.
Efni fyrir þetta skref:
Brot úr natrón-kalkgleri1 as requiredNauðsynleg verkfæri:
Platínu-ródíum-spunakassi
Hitaþolnir hanskar
Öryggisgleraugu2
2
Melt it with an electric current
Melt it with an electric current
Pass an adjustable current through the thimble to melt the glass. Ordinary lime glass is pulled from about 2,100–2,500 °F (about 1,150–1,370 °C).
Nauðsynleg verkfæri:
Platínu-ródíum-spunakassi
Niðurstigsspennir
HáhitamælirHitaþolnir hanskar3
3
Start the cooling blower
Start the cooling blower
Blow cool air across the nipple tips from a blower a short distance below them. Each filament sets within a small fraction of an inch of its nipple.
Nauðsynleg verkfæri:
Loftblásari4
4
Gather the filaments through a sized guide
Gather the filaments through a sized guide
Draw all the filaments together through one guide eye kept wet with size. Here the size is wax, kept molten with a burner; the patent also names oil, starch, gum and resin. An air jet dries off the excess size.
Efni fyrir þetta skref:
Paraffín1 as requiredNauðsynleg verkfæri:
BunsenbrennariLoftblásari5
5
Pull and wind on a drum
Pull and wind on a drum
Wind the strand on a fast drum that moves back and forth so it lays evenly. Draw at a few hundred to a few thousand feet per minute: the faster you draw, the finer the fibre.
Nauðsynleg verkfæri:
UpptökutrommaNauðsynleg verkfæri
8- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Þessi teikning býr til
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.