LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Gear Motor: Small Motor on a Three-Shaft Box of Floating Gears (Swenson 1959)
A small motor with a reduction gearbox bolted on. Swenson's box has only three shafts: the motor shaft with its pinion, a fixed stub shaft, and the output shaft. The gears ride free on the two shafts in pairs and pass the drive back and forth between them, slower at each step. Only the last gear is fixed to the output shaft.
Source: Thure R. Swenson, US 2,908,180 (1959). Unknown: the motor, the fibre gear material, the thrust bearing, the metals, and every size and ratio. Swenson gives none of these, so they are linked to unknown heads. The machining is ours. Picture: the patent's drawing.
Sérfræðingur
3 days
Leiðbeiningar
1
1
Make the housing and cover
Make the housing and cover
Make the gearbox: a housing with mounting bosses for the motor (Swenson's is a die-casting) and a front cover plate held by screws. Bore the housing for the motor-shaft nipple and for the output shaft's inner bearing, and form a seat in the cover for the outer sleeve bearing. Unknown: the metal and the sizes.
Efni fyrir þetta skref:
Óþekktur málmur1 as requiredNauðsynleg verkfæri:
Málmrennibekkur
Rennijárnasett (HSS)
Súlubor
Snittsett
Óþekkt mál2
2
Cut the gears and shafts
Cut the gears and shafts
Make the stub shaft and the output shaft. Cut the train: a small pinion for the motor shaft; a fibre gear 34 with a pinion fixed to it; gear 23 with pinion; gear 35 with pinion; gear 24 with pinion; and the final gear 36. Unknown: the tooth numbers and ratios.
Efni fyrir þetta skref:
Óþekktur málmur1 as required
Tannhjólsefni úr trefjum1 stykkiNauðsynleg verkfæri:
Málmrennibekkur
Tannhjólaskurðarvél með snigilfræsiÓþekkt mál3
3
Mount the motor with its front bearing on the housing
Mount the motor with its front bearing on the housing
The motor is conventional except for its front bearing: a casting held on the housing by screws, with a nipple fitting a bore in the housing and a sleeve bearing in the nipple. The motor shaft goes through it into the gearbox. Fix the small pinion on its end.
Efni fyrir þetta skref:
Lítill spanmótor1 stykkiNauðsynleg verkfæri:
Skrúfjárnasett
Handpressa4
4
Assemble the floating train
Assemble the floating train
On the output shaft, float the fibre gear (meshing with the motor pinion) and gear 35. On the stub shaft, float gears 23 and 24. Each drives the next by its pinion: 34 to 23, 23 to 35, 35 to 24, and 24 to the final gear 36. Press 36 onto the output shaft. Carry the output shaft in an inner bearing in the housing and a larger sleeve bearing in the cover, with a thrust ball bearing at its inner end. Screw the cover on.
Efni fyrir þetta skref:
Ásþrýstikúlulega1 stykkiNauðsynleg verkfæri:
HandpressaSkrúfjárnasettEfni
4- 1 as requiredStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.