Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Stirrup Leathers: Middlings Straps Stitched to Stirrup Buckles, Creased on the Flesh Side (Hasluck, Saddlery, 1904)
Stirrup leathers hang the stirrup irons from a riding saddle and let the rider set their length. These are the stirrup leathers from Paul N. Hasluck's Saddlery (1904): a strap of stirrup middlings 1-1/4 in wide and 4 ft to 4 ft 6 in long, stitched to a stirrup leather buckle and creased on the flesh side. A saddle takes a pair.
Byrjandi
About 3 hours
Leiðbeiningar
1
1
His sizes in centimetres
His sizes in centimetres
Hleð Jupyter-vinnubók…
2
2
Read Saddlery, ch. V
Read Saddlery, ch. V
"Stirrup leathers (Fig. 15) must be made from stirrup middlings, and with stirrup leather buckles; the width may be 1-1/8 in. to 1-1/2 in., but 1-1/4 in. is most common, whilst the length varies from 4 ft. to 4 ft. 6 in."
3
3
Cut the straps
Cut the straps
Cut two straps from stirrup middlings, 1-1/4 in wide (1-1/8 in to 1-1/2 in) and 4 ft to 4 ft 6 in long, to suit the rider. There is no need to cut holes for the buckle tongues at the buckle end, as the tongues do not go through the leather there.
Efni fyrir þetta skref:
Miðleður í ístaðsólar1 stykkiNauðsynleg verkfæri:
Leðurhnífur
Málband4
4
Stitch on the buckles
Stitch on the buckles
Bend the strong end of each strap over for about 2 in and stitch it firmly to the bottom of the buckle. Narrow the buckling end a little and nip a little from each corner.
Efni fyrir þetta skref:
Ístaðsólarsylgja2 stykki
Líntvinni1 stykki
Býflugnavax1 stykkiNauðsynleg verkfæri:
Leðurhnífur
Sýll
Tvær söðlasmíðanálar
Söðlasmíðaklemma5
5
Finish the edges and crease
Finish the edges and crease
Stain the edges and polish them well. Crease double and heavily with a hot screw crease on the flesh side, instead of the grain side as with other straps.
Efni fyrir þetta skref:
Leðurlitur1 stykkiNauðsynleg verkfæri:
Kantskurðarjárn
Kantgljáir fyrir leður
Brotverkfæri
Própanbrennari6
6
Turn the chape and punch
Turn the chape and punch
Turn the chape at the buckle the reverse way, and make about eight holes in each strap.
Nauðsynleg verkfæri:
Gatajárn fyrir leðurMálband7
7
Troubleshooting
Troubleshooting
Stirrup leather troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, stirrup leathers, pp. 48-49, Fig. 15 on p. 47; every fraction was read on the scan. He says about eight holes; his Fig. 15 shows seven. The ladies' single stirrup strap is not made here. Making them as a pair, the thread, tools and metric figures are ours.
Efni
5- 1 stykkiStaðgengill
- 2 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Nauðsynleg verkfæri
10- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.