LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Oblique-Blade Potato Masher: Press and Turn the Ring
A masher that only presses leaves lumps where it did not land.
Robert Crane Jr. of Columbia, Pennsylvania, received US 171,603, dated 28 December 1875, for a potato masher: a ring joined to a central stem by six, eight or more wedge-shaped blades "inclined at angle of about twenty-five or thirty degrees," rigid with the handle so it can be "pressed vertically downward, and simultaneously revolved by the hand."
This rung works out how a turn drives the blades in, then prints the bladed ring, fits a stem and handle, and mashes a pan of potatoes.
Byrjandi
About 1 hour, plus printing
Leiðbeiningar
1
1
Pressing and turning
Pressing and turning
Hleð Jupyter-vinnubók…
2
2
A cutting masher before it
A cutting masher before it
The embedded blueprint splits the potato with teeth on a disk. Crane makes the blades the whole face and inclines them so a turn drives them through.
3
3
Read US 171,603
Read US 171,603
"Just above its cutting-edge these blades widen radially outward, and unite with the vertical inner face of the ring in an oblique direction, inclined at angle of about twenty-five or thirty degrees. This oblique position gives the upper and lower edges of the blades a sharp angle or cutting-edge, and the narrower triangular and oblique spaces between the blades renders this implement of superior utility and efficiency."
4
4
Print the head
Print the head
Print the ring with its eight inclined blades and hub. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Efni fyrir þetta skref:
PETG-þráður1 stykkiNauðsynleg verkfæri:
FDM-þrívíddarprentari5
5
Print the ring with its eight inclined blades and hub
Print the ring with its eight inclined blades and hub
The ring with its eight inclined blades and hub, printed as step 4 describes.
6
6
Stem and handle
Stem and handle
Epoxy a 60 mm length of 8 mm steel rod into the hub as the stem, and a drilled hardwood handle on its top, so the whole is rigid.
Efni fyrir þetta skref:
Kringlótt stöng úr deigu stáli1 stykki
Harðviðartappar1 stykki
Tveggja þátta epoxý1 stykkiNauðsynleg verkfæri:
Járnsög
Hleðslubor
Borasett7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the 80 mm ring, eight blades inclined about 28° joining it to the hub, the steel stem, ferrule and handle.
8
8
Press and turn
Press and turn
Boil 500 g of potatoes, peeled and quartered, for about 20 minutes until a knife slides in; drain. Mash half by pressing and turning at once; mash the other half by pressing only. Time both to no lumps.
Efni fyrir þetta skref:
Kartöflur1 stykki
Vatn1 stykkiNauðsynleg verkfæri:
Háhliða pottur
Stór hrærskál úr ryðfríu stáli
Skeiðklukka9
9
Blades that bend, a head that turns on the stem
Blades that bend, a head that turns on the stem
Oblique-blade potato masher troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Robert Crane Jr.** of Columbia, Pennsylvania, filed US 171,603 on 26 February 1875; it is dated 28 December 1875. The blades' upper edges rise outward to meet the ring's top, their lower edges are horizontal. He knew that a handle with oblique blades in a ring made a revolving churn dasher, and claimed only the potato masher of ring, blades and handle rigidly connected.
**Honest limits.** A printed head stands in for his metal one. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times are the result.
Efni
6- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Nauðsynleg verkfæri
7- Staðgengill
- Staðgengill
- Hleðslubor3% þóknunMagento Legacy Storeships internationallyStaðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Hönnunarskrár
2Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.