LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Phthalic Anhydride by Air Oxidation of Naphthalene: Gibbs and Conover, 1918
Charlie

Búin til af

Charlie

13. október 2026DE
15
0
0
0
0

Phthalic Anhydride by Air Oxidation of Naphthalene: Gibbs and Conover, 1918

Harry D. Gibbs and Courtney Conover patented this in 1918, US 1,285,117 (filed 1917), and dedicated it to the public. Phthalic anhydride had been made by oxidising naphthalene with sulphuric acid in the presence of mercury sulphate; they used air instead. Naphthalene vapour mixed with plenty of air is passed over finely divided oxides of vanadium at 350–550 °C, and the phthalic anhydride formed is condensed and separated by fractional sublimation.
Lengra kominn
Works process

Leiðbeiningar

1

Melt and vaporise the naphthalene

Melt the naphthalene and let it flow continuously, at a measured rate, into a heated chamber where it is volatilised.

Efni fyrir þetta skref:

NaftalínNaftalín1 as required

Nauðsynleg verkfæri:

Bræðslupottur úr steypujárniBræðslupottur úr steypujárni
UppgufunarhólfUppgufunarhólf
HitamælirHitamælir
2

Mix the vapour with air

Mix the naphthalene vapour with air in excess of the amount needed to oxidise it to phthalic anhydride, preferably at least four times the amount theoretically required.

Nauðsynleg verkfæri:

LoftblásariLoftblásari
UppgufunarhólfUppgufunarhólf
3

Pass it over vanadium oxide at 350–550 °C

Pass the mixture into a reaction chamber kept at 350–550 °C, preferably 500 °C. There it is forced into close contact with oxides of vanadium in the form of a fine powder, supported on trays, with baffle plates forcing the gas current through it. Keep the gases under pressure only sufficient to make them flow continuously through the chamber. The naphthalene is oxidised to phthalic anhydride, with carbon dioxide and water.

Nauðsynleg verkfæri:

Hvatahólf með bökkumHvatahólf með bökkum
VanadínoxíðVanadínoxíð
HáhitamælirHáhitamælir
LoftblásariLoftblásari
4

Condense the products

Condense the products of the reaction, phthalic anhydride with small portions of other oxidation products of naphthalene, together with the unchanged naphthalene.

Nauðsynleg verkfæri:

ÞéttihólfÞéttihólf
5

Separate by fractional sublimation

Separate the phthalic anhydride from the other oxidation products and the unchanged naphthalene by fractional sublimation.

Nauðsynleg verkfæri:

ÞurrgufunarbúnaðurÞurrgufunarbúnaður
HitamælirHitamælir
6

How much air

Hleð Jupyter-vinnubók…

Efni

1
  • 1 as required
    Staðgengill

Nauðsynleg verkfæri

9

Tengd Blueprint

Þessi blueprint deila þekkingu — tækni, efni eða meginreglur

CC0 opinbert ríki

Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.

Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

Umræða

(0)

Skrá inn til að taka þátt í umræðunni

Hleður athugasemdum...