LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Piston-Pump Egg Beater: Pump the Eggs Through a Grate
J. J. Parker, Marietta, Ohio · Public domain (expired patent)
YourGrandma

Búin til af

YourGrandma

6. október 2026IS
28
0
0
0
0

Piston-Pump Egg Beater: Pump the Eggs Through a Grate

A whisk stirs the eggs; it does not force them through anything. J. J. Parker of Marietta, Ohio, received US 25,038, dated 9 August 1859, for an egg beater and churn combined: a tin tube with square openings at its lower end and a piston inside, worked up and down "in the manner of a pump" by a crank, which "draws the eggs in and out through the grate bars until they are completely torn in pieces or made perfectly fine and frothy"; a band turned round the tube's foot closes the openings to vary the agitation. This rung works out the jet speed at each band setting, then prints the tube, band and piston, fits the crank, and times a beating at two settings.
Miðlungs
About 3 hours, plus printing

Leiðbeiningar

1

Jet speed at each setting

Hleð Jupyter-vinnubók…
2

The churning it also does

The embedded blueprint churns cream to butter. Parker's pump-tube does the same when worked longer in cream.
3

Read US 25,038

"At the lower end of the tube is a band of about one half an inch in width loosely fitted with openings one fourth of an inch square and corresponding exactly with the openings in the tube and of the same size, so that by turning the band around either way the openings are closed or made smaller at pleasure, so as to produce more or less agitation in the eggs or cream. This band has a bottom with grate like bars cut or made in it."
4

Print the tube, band and piston

Print the tube, the band with its grate and the piston disk. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.

Efni fyrir þetta skref:

PETG-þráðurPETG-þráður1 stykki

Nauðsynleg verkfæri:

FDM-þrívíddarprentariFDM-þrívíddarprentari
5

Print the tube

The tube, printed as step 4 describes.
HönnunarskráSTLCC0 - Free
Sækja líkan
6

Print the band

The band, printed as step 4 describes.
HönnunarskráSTLCC0 - Free
Sækja líkan
7

Print the piston

The piston, printed as step 4 describes.
HönnunarskráSTLCC0 - Free
Sækja líkan
8

Pack the piston

Cut a leather disk 2 mm larger than the piston. Clamp it between the printed disk and a washer on an M3 rod end with a nut, so its edge seals the tube.

Efni fyrir þetta skref:

LeðurLeður1 stykki
Flöt skinnaFlöt skinna1 stykki
SexkantróSexkantró1 stykki
VélskrúfurVélskrúfur1 stykki

Nauðsynleg verkfæri:

FöndurhnífurFöndurhnífur
SkiptilykillSkiptilykill
Stafrænn skífmælir 6 tommurStafrænn skífmælir 6 tommur
9

Post and crank

Epoxy a 4 mm wire post up the tube's side, bent at its top into bearings 100 mm above the tube. Bend a crank shaft of 3 mm wire with a 22 mm crank one end and a handle the other, and link the crank to the rod with a wire pitman.

Efni fyrir þetta skref:

Kringlótt stöng úr deigu stáliKringlótt stöng úr deigu stáli1 stykki
Vír úr ryðfríu stáliVír úr ryðfríu stáli1 stykki
Tveggja þátta epoxýTveggja þátta epoxý1 stykki

Nauðsynleg verkfæri:

SkrúfstykkiSkrúfstykki
KringlunefjatöngKringlunefjatöng
FlatkjaftatöngFlatkjaftatöng
JárnsögJárnsög
Tær öryggisglerauguTær öryggisgleraugu
10

The patent drawing

US 25,038 drawing sheet, public domain (expired patent).
Skref 10 - Image 1
11

Beat at two settings

Stand the beater in a bowl with two eggs and a spoon of sugar. Crank twice a second with the band fully open and time to a fine froth; repeat with the band half closed.
Skref 11 - Image 1

Efni fyrir þetta skref:

EggEgg4 stykki
KornasykurKornasykur1 stykki

Nauðsynleg verkfæri:

Stór hrærskál úr ryðfríu stáliStór hrærskál úr ryðfríu stáli
SkeiðklukkaSkeiðklukka
12

A pump that leaks past, sticks or splashes

Piston-pump egg beater troubleshooting.

Flow

Loading...
13

History and honest limits

**J. J. Parker** of Marietta, Ohio, received US 25,038, dated 9 August 1859. His smaller machine's tube is one and a half inches across and one and five eighths deep; the crank shaft is No. 7 wire with a seven-eighths-inch crank; the piston is two oval pieces of thin metal with leather between, its edges forced out by pressing them together. It may also be worked by a handle on the rod instead of a crank. **Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. Printed PETG stands in for tin. The notebook treats the flow as steady. Your times are the result.

Efni

10

Nauðsynleg verkfæri

11

Hönnunarskrár

3

Þessi teikning býr til

Thumbnail
Tímabundinn texti

Sveifarþeytari

Free

9
0

Tengd Blueprint

Þessi blueprint deila þekkingu — tækni, efni eða meginreglur

Ratchet-Bar Egg Beater: Push a Rack, the Floats Spin Both Ways

Ratchet-Bar Egg Beater: Push a Rack, the Floats Spin Both Ways

eftir YourGrandmaIS

MATUR OG DRYKKUR

40
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation

Churning Butter from Cream — The 5,000-Year-Old Fat Separation

eftir TheChefDK

HANDVERK

54
0
0
0
0
0
Rack and Pinion

Rack and Pinion

eftir EmmaSE

HANDVERK

60
0
0
0
0
0

CC0 opinbert ríki

Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.

Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

Umræða

(0)

Skrá inn til að taka þátt í umræðunni

Hleður athugasemdum...