LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Rubber Hose: Braided, Spirally Wrapped and Vulcanized in Long Lengths
Henry Cobb's wrapped hose (Revere Rubber, US 1,230,867, 1917). A rubber tube is forced through a ring die, braided over while held open by pressure, wrapped by machine with a helical strip of frictioned fabric overlapping half its width, covered in rubber and vulcanized. Wrapping by machine instead of rolling bias-cut fabric by hand lets the hose run 500 ft or more, and Cobb says it stands nearly twice the bursting pressure.
The patent gives no sizes, recipes or cure times. Couplings are not part of it: an air hose is this hose with couplings fitted. The picture: the patent's sheet 1.
Lengra kominn
1 day
Leiðbeiningar
1
1
Force the inner tube
Force the inner tube
Force vulcanizable rubber compound through the ring-shaped gap between the two parts of a tube die to make the inner tube (1).
Efni fyrir þetta skref:
Gúmmíblanda1 batchNauðsynleg verkfæri:
Slöngumót2
2
Braid over the tube
Braid over the tube
Run the tube through a braiding machine that lays crossing helical strands over it (2), coating the strands with rubber compound as they braid. Keep the tube under air pressure so it does not collapse. Ours: the air from a compressor. The braid may be left out, but it holds the hose to size.
Efni fyrir þetta skref:
Garn1 batchGúmmíblanda1 batchNauðsynleg verkfæri:
Fléttivél
Loftþjappa3
3
Cut the fabric along the warp
Cut the fabric along the warp
Cut frictioned fabric into a long strip lengthwise, along the warp threads; wound helically, both warp and weft then run round the hose as if cut on the bias.
Efni fyrir þetta skref:
Gúmmíborinn dúkur1 rúllaNauðsynleg verkfæri:
Dúkahnífur4
4
Wrap the strip half over
Wrap the strip half over
Feed the braided tube through the wrapping machine, which winds the strip (3) round it under tension, each turn over half the last: two plies, the whole length without stopping. For four plies wind a second strip (5) over the first, in the same pass or a second.
Nauðsynleg verkfæri:
Slönguvafningsvél5
5
Plies from the overlap
Plies from the overlap
Hleð Jupyter-vinnubók…
6
6
Cover and vulcanize
Cover and vulcanize
Apply a layer of rubber compound (4) over the last winding for a smooth, protected outside. Vulcanize the hose for its whole length in a mould or otherwise.
Efni fyrir þetta skref:
Gúmmíblanda1 batchNauðsynleg verkfæri:
SúlfunarmótEfni
3- 1 batchStaðgengill
- 1 batchStaðgengill
- 1 rúllaStaðgengill
Nauðsynleg verkfæri
6- Staðgengill
- Staðgengill
- Loftþjappa3% þóknunMagento Legacy Storeships internationallyStaðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.