LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
English
Sabai Grass Collection and Preparation — A Traditional Fiber Crop of Odisha
Sabai grass (Eulaliopsis binata), known in Odia as Babuai grass, is a perennial grass native to South and Southeast Asia. This blueprint describes the complete process of collecting sabai grass, drying it, and preparing it for rope making. In the Mayurbhanj and Keonjhar districts of Odisha, sabai grass is a major source of livelihood for indigenous communities. It grows spontaneously on hills and infertile lands and is also cultivated. Its uses include rope making, mats, baskets, and the paper industry. It is a sustainable crop — the plant can be harvested
Byrjandi
3-4 hours per harvest session
Leiðbeiningar
1
1
Understanding Sabai Grass
Understanding Sabai Grass
Sabai grass (Eulaliopsis binata) is a perennial grass native to South and Southeast Asia, known in Odia as babui grass. It grows 30-60 cm tall in clumps. The leaves are thin and strong. It thrives on hillslopes, barren land, and rocky soil where other crops cannot grow. For the tribal communities of Mayurbhanj and Keonjhar districts of Odisha, it is an important livelihood source. It is used for rope, mats, baskets, and the paper industry (a major use in Indian paper manufacturing).
2
2
Identifying Mature Grass
Identifying Mature Grass
Sabai grass ready for harvesting turns golden or straw-colored. Green grass is immature — do not cut it. Two harvests per year are possible: after the rains (October-November) and in winter (January-February). Leaves should feel dry and flexible — if brittle, the grass is over-dried. New green shoots visible in the center of clumps indicate active roots.
3
3
Preparing Harvesting Tools
Preparing Harvesting Tools
A sharp sickle is essential for cutting sabai grass. The sickle must be sharp — a blunt sickle pulls and tears the grass, damaging the roots. Keep binding twine or straw for bundling. Bring a large bag or bamboo basket for carrying. Wear gloves for hand protection — the grass edges are sharp and can cut skin.
Efni fyrir þetta skref:
Binding Twine5 metrarNauðsynleg verkfæri:
Sickle (curved harvest blade)
Whetstone
Cotton Work Gloves
Bamboo Basket4
4
Cutting Process
Cutting Process
Cut grass at ground level — as low as possible from the clump base. Hold the clump with one hand and cut with a swift sickle motion with the other. Do not uproot — the root crown will regrow in 2-3 months. This is sabai grass's sustainable nature: it is perennial, requires no fertilizer, and regenerates naturally. Move to the next clump after finishing one.
Nauðsynleg verkfæri:
Sickle (curved harvest blade)5
5
Tying into Bundles
Tying into Bundles
Tie cut grass into small bundles of approximately 15-20 cm diameter. Use some grass strands or twine for binding. Do not make bundles too large — small bundles dry evenly. Arrange bundles in bamboo baskets or tie into portable loads. One person can collect 15-25 kg of green grass per session.
Efni fyrir þetta skref:
Binding Twine5 metrar6
6
Sun Drying
Sun Drying
Spread cut grass bundles in open sunlight in thin layers so all parts get sun. Dry for 2-3 days, turning once in between. Well-dried grass becomes light, golden-colored, and makes a snapping sound when broken. Protect from rain — wetting causes mold and spoils the grass. Incompletely dried grass develops mold during storage.
Nauðsynleg verkfæri:
Bamboo Drying Mat7
7
Sorting by Length
Sorting by Length
Sort dried grass by length. Long strands (40-60 cm) are best for rope making. Short strands (20-40 cm) are used for mats and baskets. Remove broken or damaged strands. Tie each grade into separate bundles. Proper sorting fetches better prices — paper mills buy dried sabai at 3-5 rupees per kg (price varies by season).
8
8
Soaking Grass for Rope Making
Soaking Grass for Rope Making
For rope making, soak dried grass in water for 30-60 minutes. Soaked grass becomes flexible and does not break during twisting. Do not over-soak — soaking longer than 1 hour weakens the grass. Begin twisting when the grass is slightly damp — not fully dry or fully wet.
Efni fyrir þetta skref:
Distilled Water (1 Liter)20 lítrarNauðsynleg verkfæri:
Soaking Trough9
9
Basic Rope Twisting Technique
Basic Rope Twisting Technique
Take 5-8 dampened grass strands and hold from one end. Divide strands into two groups. Twist each group clockwise, then wrap the two groups around each other counter-clockwise. This two-direction twist makes the rope strong and permanent — it does not unravel. When adding new strands, overlap 5-8 cm with old strands for a strong joint.
10
10
Rope Quality Check
Rope Quality Check
Good quality sabai rope should have uniform thickness, not break when pulled, and be golden in color. Re-twist any loose or weak joints. After fully drying, the rope will slightly reduce in thickness — this is normal. Test the load-bearing capacity for your intended use — rope made from 5-8 strands is sufficient for general tying and load carrying.
11
11
Tying into Bales for Sale
Tying into Bales for Sale
Tie dried sabai grass into large bales of 15-25 kg for sale. Bind bales firmly with rope so they do not come apart during transport. Sell at paper mills, rope factories, and local markets (haats). Paper mills pay 3-5 rupees per kg (price varies by season). Finished rope fetches a higher price.
Efni fyrir þetta skref:
Binding Twine10 metrarNauðsynleg verkfæri:
Weighing Scale12
12
Storage
Storage
Store dried sabai grass and rope in a dry, shaded place. Keep above ground level — arrange on bamboo or wooden platforms. Protect from rainwater — moisture causes mold and rot. Check storage area regularly for termite damage. Well-dried and properly stored sabai grass keeps for many months.
Nauðsynleg verkfæri:
Raised Storage PlatformEfni
2- 20 metrarStaðgengill
- 20 lítrarStaðgengill
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.