Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Solid Carbon Dioxide: Liquid Let Out into a Woollen Bag and Pressed in a Wooden Mould (Landolt, Thorpe 1912)
Charlie

Búin til af

Charlie

4. nóvember 2026DE
4
0
0
0
0

Solid Carbon Dioxide: Liquid Let Out into a Woollen Bag and Pressed in a Wooden Mould (Landolt, Thorpe 1912)

Dry ice without a machine: when liquid carbon dioxide is suddenly let out of its bottle, part of it boils off at once and the cold freezes the rest. Landolt caught the snow in woollen bags and pressed it into blocks in conical wooden moulds. Solid carbon dioxide is a white, snow-like mass that can lie in the air for some time without much loss; a thermometer pushed into it reads -79 °C. Not given: amounts, yield, and the sizes of bags and moulds. Source: E. Thorpe, Dictionary of Applied Chemistry vol. I (1912), Carbon, pp. 670-671, after Landolt, Ber. 17, 309. Picture: KarolinaHalatek, Wikimedia Commons, CC BY-SA 4.0.
Miðlungs
Unknown

Leiðbeiningar

1

Let the liquid out into a woollen bag

Take liquid carbon dioxide in its iron or steel bottle (Thorpe: bottles of 8 kg, about 4000 litres of gas). Let the liquid out freely into a woollen bag. Part of it vaporises at once and escapes through the cloth; the cold this makes freezes the rest into a white, snow-like solid that stays in the bag.

Efni fyrir þetta skref:

Fljótandi koltvísýringurFljótandi koltvísýringur1 amount not given

Nauðsynleg verkfæri:

ÞrýstigaskúturÞrýstigaskútur
UllarpokiUllarpoki
2

Press into blocks

Fill the loose solid into a conical wooden mould and compress it with a wooden piston to a firm block.

Nauðsynleg verkfæri:

Keilulaga trémót með stimpliKeilulaga trémót með stimpli

Efni

1

Nauðsynleg verkfæri

3

CC0 opinbert ríki

Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.

Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

Umræða

(0)

Skrá inn til að taka þátt í umræðunni

Hleður athugasemdum...