LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Spiral-Slide Egg Beater: Push a Slide, Two Scrolls Turn Opposite Ways
Two beaters turning opposite ways had needed gears or a rack.
Uriah Baker of Brooklyn received US 30,453, dated 23 October 1860, for an egg beater "arranging on one spindle two egg beaters, and operating them simultaneously in opposite directions, by means of independent worms or spiral threads or grooves attached to them, and an agitatory slide, working longitudinally on the spiral threads": pins on the slide turn the inner scroll one way and the outer the other as the slide is worked up and down.
This rung works out the turns per stroke, then prints two twisted bars of opposite hand and the slide's nuts, builds the spindle and scrolls, and times a beating.
Lengra kominn
About 4 hours, plus printing
Leiðbeiningar
1
1
Turns per stroke
Turns per stroke
Hleð Jupyter-vinnubók…
2
2
Two opposite beaters from one motion before it
Two opposite beaters from one motion before it
The embedded blueprint turns two pinions opposite ways with one rack. Baker does it with two spirals of opposite hand and one slide.
3
3
Read US 30,453
Read US 30,453
"The pin G, or other equivalent device on the upper end of the reciprocating agitatory slide H, engaging into grooves formed by the spiral wires E, while the pin I, or other equivalent device on the lower end of the slide H, engaging into the spiral C, rotates the scroll D, in a direct rotatory motion. By this compound action the two scrolls cut and beat the egg to pieces with great rapidity."
4
4
Print the spirals and nuts
Print the spirals and nuts
Print the right-hand twisted bar, the left-hand one and two square-hole nuts. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
Efni fyrir þetta skref:
PETG-þráður1 stykkiNauðsynleg verkfæri:
FDM-þrívíddarprentari5
5
Print the right-hand twisted bar
Print the right-hand twisted bar
The right-hand twisted bar, printed as step 4 describes.
6
6
Print the left-hand twisted bar
Print the left-hand twisted bar
The left-hand twisted bar, printed as step 4 describes.
7
7
Print the nut
8
8
Spindle and inner scroll
Spindle and inner scroll
Epoxy the right-hand bar on a 240 mm rod of 5 mm steel, 60 mm from its foot. Bend two loops of stainless wire 24 mm across onto the rod's foot: the inner scroll.
Efni fyrir þetta skref:
Kringlótt stöng úr deigu stáli1 stykki
Vír úr ryðfríu stáli1 stykki
Tveggja þátta epoxý1 stykkiNauðsynleg verkfæri:
Járnsög
Skrúfstykki
Kringlunefjatöng
Flatkjaftatöng9
9
Upper spiral and outer scroll
Upper spiral and outer scroll
Slide the left-hand bar on above it, free to turn, and stop it with a collar. Hang two wires from a disk on its top down past the slide, and bend them into an outer scroll 44 mm across round the inner one.
Efni fyrir þetta skref:
Vír úr ryðfríu stáli1 stykkiTveggja þátta epoxý1 stykki
Flöt skinna1 stykkiNauðsynleg verkfæri:
KringlunefjatöngFlatkjaftatöng
Stafrænn skífmælir 6 tommur10
10
The slide
The slide
Epoxy the two nuts into the ends of a 92 mm tube, one on each bar, so the tube slides along both. Fix a hardwood knob on the spindle's top.
Efni fyrir þetta skref:
Harðviðartappar1 stykkiTveggja þátta epoxý1 stykkiNauðsynleg verkfæri:
Þjalir (handþjöl)
Hleðslubor
Borasett11
11
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the spindle with the right-hand bar fixed and the left-hand bar free, the slide with a square nut on each, the inner and outer scrolls, and the knob.
12
12
Beat egg whites
Beat egg whites
Hold the knob and work the slide up and down in a bowl of two egg whites; time to stiff peaks.
Efni fyrir þetta skref:
Egg2 stykkiNauðsynleg verkfæri:
Stór hrærskál úr ryðfríu stáli
Skeiðklukka13
13
A slide that jams, scrolls that turn together
A slide that jams, scrolls that turn together
Spiral-slide egg beater troubleshooting.
Flow
Loading...
14
14
History and honest limits
History and honest limits
**Uriah Baker** of Brooklyn, Kings County, New York, received US 30,453, dated 23 October 1860. The lower spiral C is a permanent fixture on the spindle; the spiral E with the outer scroll F slides down onto the spindle and turns on it, kept by a shoulder; the inner scroll D is soldered to the spindle inside F; the slide is put on from the lower end and its pins inserted to engage the spirals.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. Printed twisted bars and square nuts stand in for his spiral wires and pins. Your times are the result.
Efni
7- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 2 stykkiStaðgengill
- 3 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 2 stykkiStaðgengill
Nauðsynleg verkfæri
11- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Hleðslubor3% þóknunMagento Legacy Storeships internationallyStaðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Hönnunarskrár
4Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
Oblique-Rack Egg Beater: One Rack Turns Two Beaters Opposite Ways
eftir Emma
MATUR OG DRYKKUR
38
0
0
0
0
0
Counter-Rotating Egg Beater: One Wheel, Two Beaters Turning Opposite Ways
eftir Martin
MATUR OG DRYKKUR
35
0
0
0
0
0
Ratchet-Bar Egg Beater: Push a Rack, the Floats Spin Both Ways
eftir YourGrandma
MATUR OG DRYKKUR
41
0
0
0
0
0
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.