LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Stemmed Glass Funnels Opened from a Blown Bulb
Bubbles

Búin til af

Bubbles

14. október 2026IT
29
0
0
0
0

Stemmed Glass Funnels Opened from a Blown Bulb

A filter funnel is a glass cone on a narrow stem: a folded filter paper sits in the cone and the clear liquid runs down the stem. Blow a bulb on a tube, cut the bulb open, spread it into a cone the shape of a folded paper, and the tube left below is the stem. The picture: a small glass funnel standing upside down, the opened bulb on its tube stem.
Lengra kominn
An hour per funnel, plus annealing

Leiðbeiningar

1

Blow a bulb

Close one end of a tube, gather glass there and blow a thin bulb, as for a flask.

Efni fyrir þetta skref:

GlerrörasettGlerrörasett1 stykki

Nauðsynleg verkfæri:

Glerblástursbrennari fyrir borðGlerblástursbrennari fyrir borð
ÖryggisglerauguÖryggisgleraugu
Hitaþolnir hanskarHitaþolnir hanskar
2

Open the bulb

Heat the far end of the bulb until it softens and blow it out thin, then knock or score away the thin part, leaving a cup on the tube.

Nauðsynleg verkfæri:

Glerblástursbrennari fyrir borðGlerblástursbrennari fyrir borð
DemantsrissnálDemantsrissnál
ÖryggisglerauguÖryggisgleraugu
3

Spread the cone

Heat the cup's rim and spread it with the jacks, turning, into a straight-sided cone. Check it against a filter paper folded into quarters until the paper sits flat against the glass.

Efni fyrir þetta skref:

SíupappírSíupappír1 stykki

Nauðsynleg verkfæri:

Glerblástursbrennari fyrir borðGlerblástursbrennari fyrir borð
Jacks (glermeistaratengur)Jacks (glermeistaratengur)
Hitaþolnir hanskarHitaþolnir hanskar
4

Cut the stem

Score and snap the tube to stem length with a slanted cut so drops run off the point, and fire-polish the end.

Nauðsynleg verkfæri:

DemantsrissnálDemantsrissnál
Glerblástursbrennari fyrir borðGlerblástursbrennari fyrir borð
5

Anneal

Anneal in the kiln at the glass's annealing temperature and cool slowly.

Nauðsynleg verkfæri:

BrennsluofnBrennsluofn
6

Cone for a filter paper

Hleð Jupyter-vinnubók…

Efni

2

Nauðsynleg verkfæri

6

Tengd Blueprint

Þessi blueprint deila þekkingu — tækni, efni eða meginreglur

CC0 opinbert ríki

Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.

Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

Umræða

(0)

Skrá inn til að taka þátt í umræðunni

Hleður athugasemdum...