Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Test-Tube Hydrometer, Shot-Loaded and Calibrated (Boy Mechanic, 1915)
A hydrometer for specific gravity made from two test tubes: the small one, weighted with shot set in plaster and corked, floats in the liquid held in the large one, and the depth it sinks is read against marks copied from a bought hydrometer.
Byrjandi
An hour plus calibration
Leiðbeiningar
1
1
How it floats
How it floats
Hleð Jupyter-vinnubók…
2
2
Read the Boy Mechanic
Read the Boy Mechanic
"The specific gravity of any material is the ratio of the weights of equal volumes of the material and water."
3
3
Mount the jar
Mount the jar
Take two test tubes, one able to hold the other. Stand the large one upright in a hole bored in a small block of wood: it holds the liquid.
Efni fyrir þetta skref:
Tilraunaglös1 stykki
Harðviðarborð1 stykkiNauðsynleg verkfæri:
Handsveifarbor með bor4
4
Load the float
Load the float
Put shot or other heavy metal in the bottom of the small tube until it floats upright: almost wholly under water if it is for liquids heavier than water, only just upright if for lighter ones. Fix the load with a little plaster of Paris.
Efni fyrir þetta skref:
Tilraunaglös1 stykki
Blýstöng1 stykki
Gifs (Parísargifs)1 stykki5
5
Seal it
Seal it
Push a small cork into the open end and seal it with shellac, or with resin or sealing wax melted over it with a hot soldering iron.
Efni fyrir þetta skref:
Korktappar1 stykki
Skellakkslakk1 stykki
Furukvoða1 stykkiNauðsynleg verkfæri:
Lóðbolti6
6
Mark the water line
Mark the water line
Float it in the large tube filled with pure water (rain water will do, distilled is better) and file a small mark level with the surface. In lighter liquids the mark sinks below the surface; in heavier ones it rises above.
Efni fyrir þetta skref:
Eimað vatn1 stykkiNauðsynleg verkfæri:
Þjalir (handþjöl)7
7
Calibrate
Calibrate
Float your tube and a borrowed hydrometer in the same liquid and mark your tube to match its readings. Starting with a heavy liquid, add water little by little; both float lower each time, giving more marks.
Efni fyrir þetta skref:
Eimað vatn1 stykkiNauðsynleg verkfæri:
Þjalir (handþjöl)8
8
Troubleshooting
Troubleshooting
Hydrometer troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 456 (checked on the archive.org scan boymechanicbook200chic2). Lead ingot stands in for his shot; the float numbers are our example.
Efni
8- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 2 stykkiStaðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.