LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush
Preston H. Clingan, Florence, Colorado · Public domain (expired patent)
Woody

Búin til af

Woody

6. október 2026NO
32
0
0
0
0

The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush

An oil can and a rag spill, and a brush dipped in oil drips. Preston H. Clingan of Florence, Colorado, received US 787,278, dated 11 April 1905, for "a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof": an open thimble hangs from the can's mouth to near its bottom, a rolled burlap wick inside it is frayed above the mouth into a brush, and oil in the chamber round the thimble reaches the wick from underneath. This rung works out how high a wick can lift oil, then builds the can from a jar, a tin and burlap and weighs the oil it lays on a board.
Byrjandi
About 2 hours

Leiðbeiningar

1

How high the wick lifts

Hleð Jupyter-vinnubók…
2

A wick that feeds oil before it

The embedded blueprint feeds oil to a bearing through a wick. Clingan turns the wick's frayed end into the brush.
3

Read US 787,278

"My object is to provide a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof. The can includes a wick of absorbent material, which is constantly supplied with oil or other fluid within the can."
4

Make the thimble

Remove both ends of a tin can that passes through the jar's mouth with 6 mm to spare. Cut it 10 mm shorter than the jar's inside height. File the cut edges.

Efni fyrir þetta skref:

BlikkdósBlikkdós1 stykki

Nauðsynleg verkfæri:

PlötuklippurPlötuklippur
Þjalir (handþjöl)Þjalir (handþjöl)
ReglustikaReglustika
Vinnuhanskar úr leðriVinnuhanskar úr leðri
5

Cut the lip ring

Cut an aluminium ring: outside to fit inside the jar's mouth, inside to fit round the thimble. Drill it 3 mm for a filling screw.

Efni fyrir þetta skref:

ÁlplataÁlplata1 stykki

Nauðsynleg verkfæri:

PlötuklippurPlötuklippur
HleðsluborHleðslubor
BorasettBorasett
Þjalir (handþjöl)Þjalir (handþjöl)
6

Fix the thimble

Epoxy the ring round the thimble's top and into the jar's mouth, the thimble hanging 10 mm clear of the floor. Cut a rubber washer for the filling screw.

Efni fyrir þetta skref:

GlerkrukkaGlerkrukka1 stykki
Tveggja þátta epoxýTveggja þátta epoxý1 stykki
VélskrúfurVélskrúfur1 stykki
GúmmíplataGúmmíplata1 stykki

Nauðsynleg verkfæri:

FöndurhnífurFöndurhnífur
SkrúfjárnasettSkrúfjárnasett
7

Roll the wick

Roll a strip of burlap tightly until it fills the thimble, 15 mm longer than it. Push it in and fray the top 15 mm with the fingers.

Efni fyrir þetta skref:

Hessían / strigiHessían / strigi1 stykki

Nauðsynleg verkfæri:

SkæriSkæri
ReglustikaReglustika
8

The build in 3D

FreeCAD model of this build, not of the patent: a 90 mm jar with a 66 mm mouth, the aluminium lip ring and filling screw, a 53 mm thimble 10 mm off the floor, the burlap wick with its frayed top, and the lid.
HönnunarskráBLENDCC0 - Free
Sækja líkan
9

Oil a board and weigh it

Pour linseed oil through the filling hole to half the jar's height and wait until the wick's top darkens. Weigh a plywood board, brush it once over, and weigh it again. Turn the closed jar on its side over a rag for a minute.
Skref 9 - Image 1

Efni fyrir þetta skref:

Soðin línolíaSoðin línolía1 stykki
KrossviðarplataKrossviðarplata1 stykki
BómullartuskurBómullartuskur1 stykki

Nauðsynleg verkfæri:

Stafræn eldhúsvogStafræn eldhúsvog
SkeiðklukkaSkeiðklukka
MálbandMálband
10

A wick that stays dry, floods or leaks

Oil-wick fountain brush troubleshooting.

Flow

Loading...
11

History and honest limits

**Preston H. Clingan** of Florence, Colorado, assignor of one-half to John H. Todd of Cañon City, filed US 787,278 on 28 July 1904; it is dated 11 April 1905. His can is cylindrical with both ends contracted and threaded, so the cover fits either end; the thimble is soldered to an inward lip at the mouth; the wick is preferably a roll of burlap. He named oiling or polishing surfaces and cleaning windows among its uses. **Honest limits.** A jar with one threaded mouth stands in for his can. The notebook assumes a fully wetting wick and one pore size. Your weights are the result.

Efni

10

Nauðsynleg verkfæri

12

Hönnunarskrár

1

Tengd Blueprint

Þessi blueprint deila þekkingu — tækni, efni eða meginreglur

Wick Oiler

Wick Oiler

eftir WoodyNO

TÆKNI

54
0
0
0
0
0
Lubrication: The Film Does the Work, and More Grease Is Not More Lubrication

Lubrication: The Film Does the Work, and More Grease Is Not More Lubrication

eftir MartinNO

Verkfræði

46
0
0
0
0
0
The Tube-in-the-Back Fountain Brush: Turn the Tube and the Jets Become a Soak

The Tube-in-the-Back Fountain Brush: Turn the Tube and the Jets Become a Soak

eftir YourGrandmaIS

Vélfræði

35
0
0
0
0
0

CC0 opinbert ríki

Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.

Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

Umræða

(0)

Skrá inn til að taka þátt í umræðunni

Hleður athugasemdum...