Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Thimble: the Pitted Iron Thimble Gilt Inside (Rouy and Berthier, Ure 1839)
The Paris method of Rouy and Berthier: thin sheet-iron discs, red-hot, punched step by step into a cup through five ever-deeper hollows, then turned, pitted and annealed on the lathe, gilt inside with gold leaf pressed on by a steel mandril, and banded outside with a gold fillet.
Variable: closed (pitted round end) or open (no end, for tailors).
Source: Andrew Ure, Dictionary of Arts, Manufactures and Mines (1839), 'Thimble'. Picture: a modern pitted thimble (Commons, CC BY-SA 3.0).
Lengra kominn
Unknown
Leiðbeiningar
1
1
Punch the blanks
Punch the blanks
Cut sheet iron 1/24 in thick into strips sized for the thimbles. Run them under a punch press to cut discs about 2 in across, left joined by a tail, a dozen to a strip.
Efni fyrir þetta skref:
Járnplata (hömruð)1 1/24 inNauðsynleg verkfæri:
Gatapressa2
2
Sink the cup
Sink the cup
Heat the blanks red-hot and lay each on a mandril fitted to its size. Strike the middle with a round-faced punch about as thick as a finger to sink it into the first hollow, then drive it through a block with five hollows of increasing depth until it has the thimble's shape.
Nauðsynleg verkfæri:
Aflinn
Töng
Óþekktur málmur
Hamar3
3
Turn and pit on the lathe
Turn and pit on the lathe
Chuck the rough thimble in the lathe, polish the inside, turn the outside, mark the rings for the gold band, and press in the rows of pits with a milling tool.
Nauðsynleg verkfæri:
Málmrennibekkur
Rifflunarverkfæri4
4
Anneal, gild and band
Anneal, gild and band
Anneal and brighten the thimbles. Line each inside with a thin cone of gold leaf, bonded to the iron by the hard pressure of a smooth steel mandril. Turn an annular seat outside, lay a gold fillet in it and press its edges into a fine groove cut on the lathe.
Efni fyrir þetta skref:
Blaðgull1 liningÓþekktur málmur1 gold filletNauðsynleg verkfæri:
Aflinn
KjarnastöngMálmrennibekkurEfni
3- 1 1/24 inStaðgengill
- 1 liningStaðgengill
- 1 gold filletStaðgengill
Þessi teikning býr til
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.