Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Thread Locker: Tetraethylene Glycol Dimethacrylate with Cumene Hydroperoxide, Set When Air Is Shut Out (Krieble, US 2,895,950)
An anaerobic thread locker. A little cumene hydroperoxide stirred into tetraethylene glycol dimethacrylate stays liquid as long as air reaches it. Shut between threads or plates, away from air, it sets into a tough resin and locks them.
Result: a liquid that keeps a year or more in a half-full bottle and locks steel in 40 minutes to 5 hours, depending on how much catalyst it holds. Heat speeds it up.
Source: V. K. Krieble (American Sealants Company), US 2,895,950 (1959), Example 1. Unknown: how the tetraethylene glycol dimethacrylate is made; the patent uses a bought commercial grade. Not given: bond strength. Picture: Wikimedia Commons.
Byrjandi
2 hours
Leiðbeiningar
1
1
Mix in the catalyst
Mix in the catalyst
At room temperature, stir cumene hydroperoxide into commercial-grade tetraethylene glycol dimethacrylate, measuring by volume. Anything from 0.1 to 10 % works; the patent prefers 2 to 10 %. Goggles and gloves: cumene hydroperoxide is an organic peroxide, keep it cool.
Efni fyrir þetta skref:
Tetraetýlenglýkól-dímetakrýlat100 parts by volume
Kúmenhýdróperoxíð5 parts by volume (0.1-10)Nauðsynleg verkfæri:
Mæliglas
Hrærusproti
Lokuð öryggisgleraugu
Efnaþolnir hanskar2
2
Store it with air
Store it with air
Keep the mixture in a container with air space, preferably polyethylene, which lets air through. Bottles stored half full stayed liquid for a year or more at room temperature.
Nauðsynleg verkfæri:
Plastflaska3
3
Apply to the threads
Apply to the threads
Put a few drops on the threads before joining the parts. Once air is shut out it sets. Average set times between steel plates at 25-27 °C, by catalyst share: 10 %, 42 min; 5 %, 52 min; 2 1/2 %, 74 min; 1 1/4 %, 84 min. With 0.1 % it takes about five hours.
Nauðsynleg verkfæri:
Pípettu- og dropateljarasett4
4
Speed it up with heat
Speed it up with heat
Heat sets it faster: the 0.1 % mixture between glass slides, warmed to 100 °C over a steam bath, locked them in five minutes. Ours: a water bath over a burner as the steam bath.
Nauðsynleg verkfæri:
Vatnsbað
BunsenbrennariEfni
2- 100 parts by volumeStaðgengill
- 5 parts by volume (0.1-10)Staðgengill
Nauðsynleg verkfæri
8- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.