LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Twin-Cylinder Tube-Link Churn: Two Churns Pumped Into Each Other Through a Tube
Fisher knew double dasher churns already existed, so he claimed only what joined his two.
Daniel Fisher of College Corner, Ohio, received US 7,870, dated 1 January 1851, for "connecting two vertical churns by a horizontal tube at their bottoms ... (said tube being about ten inches long, and about one fifth of the capacity of one of the vertical cylinders) in combination with the perforated cutters E E." A lever on an upright between the cylinders works perforated plungers on two rods; the cream is "alternately forced through the openings in the segmental slides E and those in the pistons."
This rung checks the tube's proportion, then prints the tube, slides and plungers, joins two pots, and makes butter.
Miðlungs
About 4 hours, plus printing
Leiðbeiningar
1
1
The tube's proportion
The tube's proportion
Hleð Jupyter-vinnubók…
2
2
Two plungers driving cream between chambers before it
Two plungers driving cream between chambers before it
The embedded blueprint drives cream through a middle chamber. Fisher's two churns are joined by a tube that fills with air.
3
3
Read US 7,870
Read US 7,870
"The perforated cutters answer the double purpose of cutting the cream in its passage to and fro and only allowing sufficient cream to enter through the perforations at each stroke of the dashers to keep the tube half full or thereabout, thereby creating a partial vacuum in the tube, which becomes filled with air."
4
4
Print the parts
Print the parts
Print the link tube with its flanges, two perforated segmental slides and two perforated plungers. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Efni fyrir þetta skref:
PETG-þráður1 stykkiNauðsynleg verkfæri:
FDM-þrívíddarprentari5
5
Print the link tube
6
6
Print the segmental slide
Print the segmental slide
The segmental slide, printed as step 4 describes.
7
7
Print the plunger
8
8
Join the pots
Join the pots
Take two straight-sided food-safe containers about 110 mm across. Drill each low in its side for the tube, push the tube's ends through and seal the flanges with silicone. Glue two thin plywood strips inside each pot either side of the opening as grooves, and slide a perforated slide down them over the tube's mouth. Stand both on a pine plank.
Efni fyrir þetta skref:
Geymslubox í matvælaflokki2 stykki
Sílikonþéttiefni1 stykki
Krossviðarplata1 stykki
Furuborð1 stykkiNauðsynleg verkfæri:
Gatasagarsett
Hleðslubor
Laufsög9
9
Lever and plungers
Lever and plungers
Screw a pine upright to the plank between the pots, rising above them, and pivot a pine lever on its top. Glue a 12 mm dowel rod in each plunger and join each to the lever on a loose screw, equally either side of the pivot.
Efni fyrir þetta skref:
Furuborð1 stykki
Harðviðartappar1 stykki
Vélskrúfur1 stykki
Sexkantró1 stykki
Trélím1 stykki
Tréskrúfa #8 x 1"1 stykkiNauðsynleg verkfæri:
HandsögHleðslubor
Borasett
Skrúfjárnasett10
10
The patent drawing
The patent drawing
US 7,870 drawing sheet, public domain (expired patent).
11
11
Pump and make butter
Pump and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour 1 litre into each pot. Work the lever up and down like a pump handle; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Efni fyrir þetta skref:
Rjómi2000 ml
Gróft sjávarsalt1 stykki
Vatn1 stykkiNauðsynleg verkfæri:
Hitamælir með nema sem situr í
Skeiðklukka
Stafræn eldhúsvog
Stór hrærskál úr ryðfríu stáli12
12
Leaks at the tube, a lever that sticks
Leaks at the tube, a lever that sticks
Twin-cylinder tube-link troubleshooting.
Flow
Loading...
13
13
History and honest limits
History and honest limits
**Daniel Fisher** of College Corner, Butler County, Ohio, received US 7,870, dated 1 January 1851. His cylinders stood on a horizontal plank with movable covers tied together at top; he explained the butter by "the oxygen of the atmosphere"; that is his account.
**Honest limits.** Our tube is far smaller than his one fifth, as the notebook shows; printed parts and food-safe pots stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Efni
13- 1 stykkiStaðgengill
- 2 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 2000 mlStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Nauðsynleg verkfæri
11- Staðgengill
- Staðgengill
- Hleðslubor3% þóknunMagento Legacy Storeships internationallyStaðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Hönnunarskrár
3Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
Double-Dasher Lever Churn: Swing One Lever, One Dasher Rises as the Other Falls
eftir Woody
Trésmiði
36
0
0
0
0
0
Interraking Plunger Churn: Two Rakes Worked Oppositely by a Double Crank
eftir Martin
MATUR OG DRYKKUR
23
0
0
0
0
0
Twin-Plunger Air-Chamber Churn: Two Plungers Throw the Cream Through a Middle Chamber
eftir Emma
MATUR OG DRYKKUR
32
0
0
0
0
0
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.