LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Venetian Borax: Refining Tincal with Lime
Charlie

Búin til af

Charlie

13. október 2026DE
14
0
0
0
0

Venetian Borax: Refining Tincal with Lime

Native borax, tincal, came to Europe from the dried lake shores of Tibet and India coated in an earthy, soapy fat. Venice, then the Dutch, refined it in secret: the refined salt was called Venetian borax. One of their methods is recorded by Knapp, as Muspratt gives it in 1860: soften the tincal with water and a little slaked lime, wash it clean, dissolve it hot with a little chloride of calcium to take out the last of the soap, then crystallise it in lead-lined wooden cones. Borax is the flux of brazing and soldering.
Miðlungs
Several days

Leiðbeiningar

1

Weigh the tincal and the additions

Weigh the tincal, about 1 per cent of its weight of slaked lime, and about 2 per cent of chloride of calcium (step 7 works it out for 10 kg).

Efni fyrir þetta skref:

Tinkal (óhreinsað bórax)Tinkal (óhreinsað bórax)10 kg
Slökkt kalk (kalsíumhýdroxíð)Slökkt kalk (kalsíumhýdroxíð)100 g
KalsíumklóríðKalsíumklóríð200 g

Nauðsynleg verkfæri:

SkálavogSkálavog
2

Soften it with water and lime

Soften the tincal in a small quantity of cold water in a wooden tub, and stir it about while adding the slaked lime little by little.

Efni fyrir þetta skref:

VatnVatn1 as required

Nauðsynleg verkfæri:

TrébaliTrébali
TréspaðiTréspaði
Hlífðargleraugu gegn efnaslettumHlífðargleraugu gegn efnaslettum
GúmmíhanskarGúmmíhanskar
3

Wash it several times

Pour off the turbid lime-water. Let the impurities settle out of it, then pour the clear liquid back over the crystals. Repeat this several times; it takes away the greater part of the soapy crust.

Nauðsynleg verkfæri:

TrébaliTrébali
TréspaðiTréspaði
4

Dissolve hot with chloride of calcium

Dissolve the washed crystals in hot water and add the chloride of calcium. It turns what soap remains into an insoluble lime soap (and common salt); strain that off.

Efni fyrir þetta skref:

VatnVatn1 as required
ViðarkolViðarkol1 as required

Nauðsynleg verkfæri:

UppgufunarpannaUppgufunarpanna
ViðarkolaofnViðarkolaofn
SíaSía
TréspaðiTréspaði
Hlífðargleraugu gegn efnaslettumHlífðargleraugu gegn efnaslettum
GúmmíhanskarGúmmíhanskar
5

Boil down to 21 degrees Baumé

Evaporate the clear liquid to 21 degrees Baumé, a specific gravity of 1.17, checking with a hydrometer.

Efni fyrir þetta skref:

ViðarkolViðarkol1 as required

Nauðsynleg verkfæri:

UppgufunarpannaUppgufunarpanna
ViðarkolaofnViðarkolaofn
FlotvogFlotvog
6

Crystallise in lead-lined cones

Run the liquor into wooden vessels lined with lead and shaped as short inverted cones, and let it crystallise. Any deposit collects in the narrow lower part and does not spoil the crystals. Knapp adds that a little tincal stirred in before this last crystallisation keeps the crystals from splitting and flying off the work when heated for soldering.

Nauðsynleg verkfæri:

KristöllunarkerKristöllunarker
BlýþynnaBlýþynna
7

Knapp's additions, per 10 kg

Hleð Jupyter-vinnubók…
8

Powder it for flux

Take out the crystals, dry them and grind them in a mortar to a powder for use as flux. Keep it covered: in dry air borax slowly loses water and turns opaque on the surface.

Nauðsynleg verkfæri:

Mortél og mortélstauturMortél og mortélstautur
9

Troubleshooting

Borax refining troubleshooting.

Flow

Loading...
10

History and honest limits

Muspratt (1860) gives Knapp's two known methods of the secret Venetian and Dutch refining; this is the lime method. The other washed the powdered tincal with caustic soda lye and added carbonate of soda. By Muspratt's time most borax was made instead from the boracic acid of Tuscany and carbonate of soda. Knapp's per cent figures do not say of what; we take them as per cent of the tincal. Grinding the crystals to powder is ours.

Efni

5

Nauðsynleg verkfæri

12

Tengd Blueprint

Þessi blueprint deila þekkingu — tækni, efni eða meginreglur

CC0 opinbert ríki

Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.

Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

Umræða

(0)

Skrá inn til að taka þátt í umræðunni

Hleður athugasemdum...