LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Worm-Drive Hose Clamp: North & Burke, 1945
Edwin W. North and William O. Burke of the National Lock Company, Rockford, Illinois, patented this hose clamp in 1945, US 2,386,629, for hoses carrying compressed air, gasoline and other fluids in aircraft. A band of resilient spring steel is pierced with a row of slanted slots, which a stamping operation can make, set at the angle of the screw thread. A U-shaped saddle is spot welded near one end of the band, and a housing riveted to it holds a screw whose thread runs through the slots. Turning the screw draws the band tight. One clamp fits a wide range of hose sizes.
Miðlungs
Factory process
Leiðbeiningar
1
1
Slot the band
Slot the band
Stamp a row of transverse slots along the spring steel band, inclined to match the spiral thread of the screw.
Efni fyrir þetta skref:
Fjaðurstálræma1 as requiredNauðsynleg verkfæri:
Stönsunarpressa2
2
Saddle
Saddle
Spot weld the U-shaped saddle, its base curved along the band, near the band's inner end. The band is set up by the base's thickness so the base's curved inner surface continues the band's.
Efni fyrir þetta skref:
Söðull slönguklemmu1 stykkiNauðsynleg verkfæri:
Punktsuðutæki3
3
Screw and housing
Screw and housing
Lay the screw, with its continuous spiral thread, in the saddle with its reduced ends in the slots of the housing's end walls. Fit the housing over it: the prongs on the saddle's side walls pass through openings in the housing's flanges and are riveted over to fix them together.
Efni fyrir þetta skref:
Snigilskrúfa slönguklemmu1 stykki
Skrúfuhús slönguklemmu1 stykki4
4
Fit
Fit
Pass the band's free end round the hose and under the screw: the thread engages the slots, and turning the screw draws the band tight.
Efni
4- 1 as requiredStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Nauðsynleg verkfæri
2- Staðgengill
- Punktsuðutæki10% þóknunStaðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.