LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Writing Paper: Rag Sheets Sized and Hot-Pressed Smooth
Tex

Búin til af

Tex

14. október 2026FO
15
0
0
0
0

Writing Paper: Rag Sheets Sized and Hot-Pressed Smooth

A pen needs paper that does not let ink spread: sized, so the ink stays on top, and smooth, so the nib does not catch. Andrew Ure (1839) gives both: hand-made rag sheets dipped in gelatine size, then hot-pressed between smooth pasteboards and heated iron plates, "which communicates a fine smooth surface to writing-paper". The picture: the drying loft of an 18th-century paper mill, sheets hung on lines (Diderot's Encyclopédie).
Miðlungs
About a week with drying

Leiðbeiningar

1

Size the sheets

Melt hide glue in water with a little alum to a thin, warm size. Spread a few dry, unsized rag sheets in it at a time so each is wetted evenly.

Efni fyrir þetta skref:

PappírPappír50 plötur
SkinnlímSkinnlím100 g
Álún (kalíumálún)Álún (kalíumálún)10 g
VatnVatn2 lítrar

Nauðsynleg verkfæri:

JárnketillJárnketill
KerKer
2

Press and dry slowly

Press out the spare size between felts, part the sheets, press again and hang them to dry slowly (Ure allowed three days).

Nauðsynleg verkfæri:

UllarþófaplataUllarþófaplata
Pappírspressa (bókarlaga)Pappírspressa (bókarlaga)
ÞurrkstrengurÞurrkstrengur
3

Hot-press

Stack the dry sheets, each between two smooth pasteboards, with a heated iron plate in the pile, and press it hard. The heat and pressure give the smooth writing surface.

Nauðsynleg verkfæri:

Límdur pappiLímdur pappi
JárnplataJárnplata
HitaplataHitaplata
Pappírspressa (bókarlaga)Pappírspressa (bókarlaga)

Efni

4
  • 50 plötur
    Staðgengill
  • Staðgengill
  • Staðgengill
  • 2 lítrar
    Staðgengill

Nauðsynleg verkfæri

8

CC0 opinbert ríki

Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.

Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

Umræða

(0)

Skrá inn til að taka þátt í umræðunni

Hleður athugasemdum...