ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Abaca Fibre: Leaf Sheaths Tuxied and Hand-Stripped
Abaca, Manila hemp, is the fibre in the leaf sheaths of Musa textilis, a banana relative from the Philippines; it makes Manila rope, coarse twine and strong papers. Cut the stalk after flowering, peel the outer sheath layers away (tuxying), strip the fibre by hand with a knife and dry it in the sun.
The picture: pulling abaca strips under a knife at the harvest site.
Principiante
Two days
Istruzioni
1
1
Cut the stalk
Cut the stalk
After the plant has flowered and before fruit forms, cut the stalk near the ground and take off the leaves.
Materiali per questo passaggio:
Fusto di abaca maturo (da 18 a 24 mesi)60 kgStrumenti necessari:
Bolo
Guanti da lavoro in pelle2
2
Tuxy
Tuxy
Loosen the leaf sheaths one by one and peel the outer, fibre-bearing layer (the tuxy) away from the soft inner layer.
Strumenti necessari:
Coltello da cucina3
3
Strip
Strip
Lay each tuxy on a board, press a knife down on it and pull the strip through under the blade, scraping the pulp away and leaving the fibre.
Strumenti necessari:
Coltello da cucina
Blocco di legno duro
Guanti da lavoro in pelle4
4
Dry and bundle
Dry and bundle
Hang the fibre on a rack in the sun until dry, then tie it in bundles and weigh it.
Strumenti necessari:
Essiccatoio di bambù
Cordame
Bilancia a bracci5
5
Fibre from your stalks
Fibre from your stalks
Caricamento del notebook Jupyter…
Materiali
1- Segnaposto
Strumenti richiesti
7- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

