ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Bamboo Drying Rack: Split-Cane Slats on a Pole Frame
Woody

Creato da

Woody

14. ottobre 2026NO
7
0
0
0
0

Bamboo Drying Rack: Split-Cane Slats on a Pole Frame

A flat rack of split bamboo slats lashed across a pole frame, with gaps between the slats so air reaches what is laid on it from above and below: noodles, herbs, tea leaves or fruit. Split the culms into slats, build the frame on four legs, and lash the slats on. The picture: our diagram of the rack.
Principiante
A day

Istruzioni

1

Split the slats

Saw bamboo culms to the width of the rack. Set the froe on the end, strike it with the mallet and split each culm in halves, then quarters and on into strips about 3 cm wide. Knife off the inner node walls.

Materiali per questo passaggio:

Pali di bambùPali di bambù4 pezzi

Strumenti necessari:

Sega a manoSega a mano
Coltello da spacco (froe)Coltello da spacco (froe)
Mazzuolo di legnoMazzuolo di legno
Coltello da intaglio sloydColtello da intaglio sloyd
RighelloRighello
2

Build the frame

Saw two long rails and two short end bars from whole poles and lash them into a rectangle. Lash a leg at each corner, splayed a little outward.

Materiali per questo passaggio:

Pali di bambùPali di bambù3 pezzi
CordameCordame10 metri

Strumenti necessari:

Sega a manoSega a mano
MacheteMachete
RighelloRighello
3

Lash on the slats

Lay the slats across the rails, skin side up, with an even gap between them, and lash each one to both rails.

Materiali per questo passaggio:

CordameCordame20 metri

Strumenti necessari:

MacheteMachete
RighelloRighello
4

Slats

Caricamento del notebook Jupyter…

Materiali

2

Strumenti richiesti

6

Blueprint correlati

Questi blueprint condividono conoscenze — tecniche, materiali o principi

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...