ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Brick Blacksmith's Forge with a Bottom-Blast Tuyere
Forge

Creato da

Forge

11. ottobre 2026NO
20
0
0
0
0

Brick Blacksmith's Forge with a Bottom-Blast Tuyere

A forge is a hearth with a bowl for the fire and an opening in its bottom, the tuyere, through which the blast of air is forced. One smith's forge of the 1880s was two feet four inches high and four feet square, built of brick and stone, with a 12-inch chimney flue, the tuyere iron set four inches below the surface and the forge hollow underneath so the fire could be dumped and the ashes cleared. Advice of the same time: keep the tuyere's centre at least eighteen inches from the back wall and the working side, set its top four to six inches below the hearth (deeper for heavy work), and leave a recess in the back wall at least 8 inches deep, 24 high and 24 wide. The blast came from a blower or bellows.
Intermedio
Several days

Istruzioni

1

Build the base

Build the hearth of brick and stone, about two feet four inches high and four feet square (one smith's size), hollow underneath with an opening for the ash.

Materiali per questo passaggio:

Mattoni di argilla cottaMattoni di argilla cotta1 as required
PietrePietre1 as required

Strumenti necessari:

Cazzuola da muratoreCazzuola da muratore
2

Back wall and recess

Raise the back wall and chimney with a 12-inch flue; leave a recess at least 8 in deep, 24 in high and 24 in wide behind the fire.

Materiali per questo passaggio:

Tubo fumarioTubo fumario1 pezzo

Strumenti necessari:

Cazzuola da muratoreCazzuola da muratore
3

Set the tuyere

Set the tuyere with its centre at least 18 in from the back wall and the working side, its top 4–6 in below the hearth surface.

Materiali per questo passaggio:

Ugello da forgiaUgello da forgia1 pezzo
4

Blast

Connect the blower or bellows to the tuyere pipe, with a way to open it underneath and clear cinders.

Strumenti necessari:

Ventilatore da forgia a manovellaVentilatore da forgia a manovella

Materiali

4

Strumenti richiesti

2

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...