ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Bristle Paint Brushes: Wide Flat and a Set of Rounds and Flats
A brush is a knot of bristle held in a metal ferrule on a wooden handle. Hog bristle is stiffer and stronger than soft hair; a flat brush spreads paint quickly and evenly, a round one with a pointed tip does detail. Bind and glue boar-bristle knots, set them in copper ferrules, and fit beech handles: a wide flat brush and a set of small flats, rounds, a filbert and a liner.
The picture: our diagram, a wide flat brush and four small brushes.
Intermedio
A day
Istruzioni
1
1
Sort the bristle
Sort the bristle
Comb boar bristles straight, keep the natural tips together at one end, and cut the root ends level. Lengths: about twice the knot width for flats, longer for rounds and the liner (our rule).
Materiali per questo passaggio:
Setole di cinghiale0.1 kgStrumenti necessari:
Pinzetta a punte fini
Forbici2
2
Tie and glue the knots
Tie and glue the knots
Bundle each knot, tie the root end tightly with waxed thread, and dip the root in hide glue melted in a beaker standing in hot water. For rounds and the liner, shape the tips to a point before the glue sets.
Materiali per questo passaggio:
Filo di lino cerato3 m
Colla di pelle0.1 kgStrumenti necessari:
Pentola grande (inferiore, per il bagnomaria)
Becher di vetro3
3
Make the ferrules
Make the ferrules
Cut copper sheet into strips, roll them into tubes round the knot (flat for flats, round for rounds), and lap the seam.
Materiali per questo passaggio:
Lamiera di rame1 pezzoStrumenti necessari:
Cesoie da lattoniere
Martello a penna trasversale
Pinze a becchi piatti4
4
Handles
Handles
Turn beech handles on the lathe, slimmer for the small brushes, and a flat paddle for the wide one, each with a tenon to fit its ferrule.
Materiali per questo passaggio:
Legname di faggio1 pezzoStrumenti necessari:
Tornio a pertica
Sgorbia da tornio
Sega a mano5
5
Assemble
Assemble
Glue the knot into the ferrule, push the handle tenon in behind it with glue, and crimp the ferrule onto the handle with pliers. Let the glue set before use.
Materiali per questo passaggio:
Colla di pelle0.05 kgStrumenti necessari:
Pinze a becchi piatti
Pentola grande (inferiore, per il bagnomaria)
Becher di vetro6
6
Bristle for a knot
Bristle for a knot
Caricamento del notebook Jupyter…
Materiali
5- 0.1 kgSegnaposto
- Segnaposto
- 0.1 kgSegnaposto
- 1 pezzoSegnaposto
- 1 pezzoSegnaposto
Strumenti richiesti
10- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.




