ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
FUTURO VERDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Building a Sheng — The Chinese Free-Reed Mouth Organ
Woody

Creato da

Woody

3. luglio 2026NO
0
0
0
0
0

Building a Sheng — The Chinese Free-Reed Mouth Organ

Build a sheng: a cluster of bamboo pipes rising from a wind chamber, each voiced by a tiny springy free reed. Cover a pipe's finger hole and it sings; cover several and it plays a chord — and it sounds on both blow and draw. A serious maker build in the free reed, the mechanism the harmonica and accordion were born from.
Intermedio
Several hours over a few sessions

Istruzioni

1

A gourd full of singing bamboo

The sheng is a mouth organ: a bundle of bamboo pipes standing in a wind chamber, each voiced by a tiny springy reed. It is the world's first free-reed instrument and the ancestor of the harmonica and accordion — and it can play chords.
2

Make the wind chamber

Hollow a dried bottle gourd into an airtight air-chamber and fit a short mouthpiece tube into its neck to blow through. Early sheng used a gourd just like this.

Materiali per questo passaggio:

Mature Bottle GourdMature Bottle Gourd1 pezzo

Strumenti necessari:

Sloyd Carving KnifeSloyd Carving Knife
3

Cut the pipes

Cut several thin bamboo pipes of different lengths. Start with five or six — enough for a small scale or a couple of chords.

Materiali per questo passaggio:

BambooBamboo1 pezzo

Strumenti necessari:

HacksawHacksaw
4

Cut a reed window in each pipe

Near the bottom of each pipe cut a small, clean rectangular window. The free reed will sit over this window.

Strumenti necessari:

Sloyd Carving KnifeSloyd Carving Knife
5

Cut the free reeds

From thin brass, cut a tiny tongue that ALMOST fills a matching slot — fixed at one end, free at the other, with a hair-fine gap all around so it can swing cleanly through.

Materiali per questo passaggio:

Brass Shim (Reed Stock)Brass Shim (Reed Stock)1 pezzo

Strumenti necessari:

Metal FileMetal File
6

Fit a reed to each pipe

Seal a reed over each pipe's window with wax, airtight, with the free tongue facing inward toward the chamber.

Materiali per questo passaggio:

BeeswaxBeeswax1 pezzo
7

Cut a finger hole in each pipe

Cut one finger hole in the side of each pipe. This little hole is the on/off switch for that pipe's note.

Strumenti necessari:

AwlAwl
8

Seat the pipes airtight

Push the pipes down into the top of the chamber and seal each with wax so NO air can leak except through the reeds themselves.

Materiali per questo passaggio:

BeeswaxBeeswax1 pezzo
9

Test one pipe

Blow gently into the mouthpiece and cover one pipe's finger hole. Covering the hole forces the air through that pipe's reed, and the reed sings out.
10

The finger-hole switch

With the hole OPEN, air just escapes and the reed stays silent. COVER the hole and the pipe sounds. That is how you pick out notes on a sheng.
11

Tune the reeds

Add a dab of wax to a reed's tip to LOWER its pitch, or file the tip thinner to RAISE it, until every pipe is in tune. The reed sets the pitch, not the pipe length.

Materiali per questo passaggio:

BeeswaxBeeswax1 pezzo

Strumenti necessari:

Metal FileMetal File
12

Play a chord

Cover several finger holes at once and blow. The sheng sounds them all together as a chord — something almost no other wind instrument can do.
13

Blow and draw

Now breathe IN through the mouthpiece. Free reeds sound on both blow and draw — the very trick the harmonica borrowed from the sheng.
14

Compendium — the free reed

The sheng is built on the free reed: a thin springy tongue that vibrates freely back and forth THROUGH a close-fitting slot, instead of slapping shut against a frame like the beating reed of a clarinet or the buzzing lips of a horn. Air flowing past the tongue sets it swinging in and out of the slot, chopping the airflow into a steady tone at the tongue's own pitch — and because the tongue passes cleanly through the gap, it speaks equally well whether you blow or draw, which is why the sheng and its child the harmonica both play in and out. Each reed is paired with a pipe whose air column reinforces it, and the finger hole is a switch: only when the hole is covered is the air forced through the reed, so a player can pick out notes, and several at once, giving the sheng its rare power to play chords. Pitch is set by the reed's length, thickness and a tuning dab of wax — not by the pipe's length. The sheng has been played in China for some three thousand years, and when examples reached Europe around 1800 they sparked a whole family of Western instruments: the harmonica, accordion, concertina, harmonium and reed organ all descend from this gourd full of singing bamboo. Its distant cousin is the jaw harp, whose plucked springy tongue is the same free-vibrating idea, driven by a finger instead of by breath.

Materiali

4

Strumenti richiesti

4

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

Blueprint correlati

Questi blueprint condividono conoscenze — tecniche, materiali o principi

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...