ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Crushing and Grading Charcoal
Forge

Creato da

Forge

11. ottobre 2026NO
44
0
0
0
0

Crushing and Grading Charcoal

Lump charcoal comes in pieces from fingertip to fist size. A forge or a smelting furnace burns evenly only on pieces of one size, so the lumps are broken in a sack and sieved into grades. Bloomery smelters break it to about 2.5 cm and sift the fines out through a 1 cm (3/8 inch) mesh; the fines are kept for the furnace base, for insulation or for the garden. Weigh each grade: the split tells you how much of a sack is usable at your size.
Principiante
About 1 hour per sack

Istruzioni

1

Choose the size

Decide the largest and smallest piece you want. For a bloomery: no larger than 2.5 cm and nothing smaller than 1 cm. A forge fire takes the same range or a little smaller.

Strumenti necessari:

Metro a nastroMetro a nastro
2

Damp the dust

Work outdoors. Mist 2 kg of lump charcoal lightly with water to keep the dust down, and put on a dust mask, gloves and glasses.

Materiali per questo passaggio:

Carbone di legnaCarbone di legna2 kg
AcquaAcqua0.1 litro

Strumenti necessari:

Spruzzino ad acquaSpruzzino ad acqua
Mascherina antipolvereMascherina antipolvere
Guanti da lavoro in pelleGuanti da lavoro in pelle
Occhiali di sicurezzaOcchiali di sicurezza
3

Break it in the sack

Put the charcoal in a burlap sack, fold the top over, lay it on hard ground and strike it with the wooden mallet. Turn the sack and feel the size through the cloth; stop while most pieces are still larger than you want, or it all turns to dust.

Strumenti necessari:

Sacco di iutaSacco di iuta
Mazzuolo di legnoMazzuolo di legno
4

Sieve into grades

Sieve the lot through the coarse screen: what stays on it goes back in the sack. Sieve what passed through the 1 cm screen: what stays on top is your crushed charcoal, what falls through is fines.

Strumenti necessari:

Serie di setacci (maglie graduate)Serie di setacci (maglie graduate)
Secchio metallicoSecchio metallico
5

Weigh the grades

Weigh the crushed charcoal and the fines. Write down the share of each: it is the sack's yield at your size.

Strumenti necessari:

BilanciaBilancia
6

Store dry

Let damp charcoal dry in the air, then store each grade in its own lidded metal bin, labelled. Wet charcoal spits and burns cold.

Strumenti necessari:

Secchio metallico con coperchioSecchio metallico con coperchio
7

Troubleshooting

Charcoal crushing troubleshooting.

Flow

Loading...

Materiali

2

Strumenti richiesti

11

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...