ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Cyanoacrylate Adhesive
Harry Coover first met cyanoacrylates in 1942 while looking for a clear plastic for gun sights, and rejected them because they stuck to everything. In 1951 at Eastman Kodak he and Fred Joyner met them again - and this time saw a glue that set in seconds with no heat or pressure. It was sold from 1958.
**US 2,794,788**, "Adhesive compositions containing alkyl esters of cyanoacrylic acid", Coover and Shearer, Eastman Kodak, filed 1. November 1952, granted 4. June 1957, claims the monomeric alkyl α-cyanoacrylate adhesive. **US 2,768,109**, "Alcohol-catalyzed alpha-cyanoacrylate adhesive compositions", Coover, filed 2. June 1954, granted 23. October 1956, claims "strongly bonding wood having an acidic surface character" by first moistening it with an alcohol of 1 to 8 carbon atoms.
**You test that second claim on oak**, an acidic wood: dry, wiped with isopropyl alcohol, and misted with water.
Principiante
1 hour plus 24 h
Istruzioni
1
1
Cut the strips
Cut the strips
Saw eighteen oak strips 80 x 20 mm, about 5 mm thick. Sand one end face of each with 180 grit and dust off. Pencil-mark three groups: dry, IPA, water.
Materiali per questo passaggio:
Tavola di quercia bianca1 pezzoStrumenti necessari:
Sega a mano
Carta abrasiva2
2
Prepare the surfaces
Prepare the surfaces
Leave the first group dry. Wipe the ends of the second with isopropyl alcohol on a towel and use them within a minute. Give the third one light mist of water and blot. Note the room humidity.
Strumenti necessari:
Spruzzino ad acqua
Igrometro (misuratore di umidità)
Carta da cucina
Alcol isopropilico al 99 %3
3
Glue and time
Glue and time
Gloves and glasses on. One drop of CA on one end, overlap a partner strip by 20 mm, press 5 seconds and start the stopwatch. Every 10 seconds hang the spring scale from the free strip and pull to 2 N: record when it first holds. Three joints per group.
Strumenti necessari:
Cronometro
Dinamometro (bilancia a molla)
Guanti in nitrile
Occhiali di sicurezza trasparenti
Colla istantanea (cianoacrilato)4
4
Break them tomorrow
Break them tomorrow
After 24 hours clamp one strip of each joint in the vise and tap the free end sideways with the mallet until it breaks. Estimate how much of the bond area is torn wood.
Strumenti necessari:
Morsa da banco
Mazzuolo di gommaOcchiali di sicurezza trasparenti5
5
Set times and joints
Set times and joints
Caricamento del notebook Jupyter…
6
6
History & Context
History & Context
**What the patents specify:** a monomeric alkyl α-cyanoacrylate adhesive held liquid by an acid inhibitor, and, for acidic surfaces, a prior wipe with a C1–C8 alcohol. **Modern build (derived):** hardware-store CA glue on oak.
CA spread from industry to every workshop, and in the Vietnam War medics used a CA spray to seal wounds; purpose-made medical grades followed. Its limits: brittle joints that fail in peel and impact, poor gap filling, and it bonds skin instantly - acetone releases it.
Materiali
1- 1 pezzoSegnaposto
Strumenti richiesti
13- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.