ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Fellows Sprocket-Wheel Cutter (US 579,708, Fig. 20): The 3D Model
A 3D model of the cutter c3 that Edwin R. Fellows drew in Fig. 20 of US 579,708 (1897) for cutting the teeth of a sprocket-wheel. It has seven broad teeth with narrower recesses between them, as his text says: "the teeth being longer than the intervening recesses."
The patent gives no dimensions and no mathematical tooth form for this cutter, so its profile was traced off the patent drawing. Fig. 20 shows the cutter only from the cutting end. The body behind the teeth is therefore an assumption: the shank, hollow and dished face are copied from the gear cutter of Fig. 11. It is a display and teaching model, not a working tool.
Intermedio
Several hours of printing; the slicer reports the exact time
Istruzioni
1
1
The cutter in Fig. 20
The cutter in Fig. 20
Fellows: "In Fig. 20 I show a cutter c3 formed to cut a sprocket-wheel, the teeth being longer than the intervening recesses." The drawing shows c3 from its cutting end, rolling against a sprocket rim on its arm. Earlier teeth of the rim are already shaped, and the one in front of the cutter is being generated. The same machine and the same rolling motion that cut gear teeth cut sprocket teeth. Only the cutter's profile changes.
2
2
The model in 3D
The model in 3D
Spin the cutter in the viewer and look at its cutting face. The seven teeth follow Fellows's own outline: it was traced from the patent drawing, not drawn anew. It was built in FreeCAD and saved as one joined .blend mesh, editable in free Blender.
Strumenti necessari:
Computer da tavolo3
3
Print it
Print it
Stand it on its cutting face with the shank up. The dished face is a near-flat overhang and the hollow has a 24 mm flat roof, so turn on supports from the build plate. PLA is fine for a display model. The real cutter is hardened steel.
Materiali per questo passaggio:
Filamento PLA - nero1 kitStrumenti necessari:
Stampante 3DMateriali
1- 1 kitSegnaposto
Strumenti richiesti
2- Segnaposto
- Segnaposto
File di progetto
1Materiali dei progetti collegati
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.