Collaborazione
ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Glass Delivery Tube: Cut and Bent over a Broad Flame (Frary, 1914)
A delivery tube is just glass tube cut square and bent to lead gas or vapour where it is wanted. A single clean scratch and a pull give a square break; a broad flame and a turning tube give an even bend that does not kink.
Result: a bent glass delivery tube for gas generators, stills and similar apparatus.
Source: F. C. Frary, C. S. Taylor and J. D. Edwards, Laboratory Manual of Glass-Blowing (1914), pp. 7-9. Unknown: the tube's shape and size, which depend on the apparatus. Picture: a drawn diagram.
Principiante
Unknown
Istruzioni
1
1
Cut the tube square
Cut the tube square
Grind an old flat file into a glass-knife, its edges sharp with a 30 to 60 degree bevel. Scratch the cold tube once with it; never saw back and forth. Pull the ends apart while bending the tube very slightly to open the crack. For large or thin-walled tube, touch a red-hot glass bead, 1/16 to 1/8 inch, to the scratch to start the crack round. If the glass is hot, use a file with its edge moistened.
Materiali per questo passaggio:
Tubo di vetro1 delivery tube stockStrumenti necessari:
Lima per metalli2
2
Bend it in a broad flame
Bend it in a broad flame
Heat the tube in a broad flame, turning it on its axis all the time, and let it bend mostly under its own weight. For large tube, stopper one end and bend with great care. If the bend starts to collapse or deform, blow it gently back into shape, reheating that spot. Frary uses a fish-tail burner for most work and a blast lamp for large tube. Ours: the bench blast lamp for both. Not given: the shape and sizes.
Strumenti necessari:
Cannello da vetraio da banco
Tappi di sugheroMateriali
1- 1 delivery tube stockSegnaposto
Strumenti richiesti
3- Segnaposto
- Segnaposto
- Segnaposto
Materiali dei progetti collegati
Questo progetto realizza
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.