ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Borosilicate Measuring Jug with a Pulled Handle
Bubbles

Creato da

Bubbles

14. ottobre 2026IT
21
0
0
0
0

Borosilicate Measuring Jug with a Pulled Handle

A measuring jug is a wide glass beaker with a pouring spout, a handle and volume marks; in borosilicate it takes boiling liquids. Make the body as for a beaker from wide tube, fuse on a handle drawn from thick rod, anneal, and mark it by weighing water. The picture: an old glass measuring cup with its handle applied hot and a stamped seal (Metropolitan Museum of Art).
Avanzato
Two hours, plus annealing

Istruzioni

1

Body

From wide borosilicate tube, close and flatten a bottom, flare the rim and pull a deep spout, as for a beaker.

Materiali per questo passaggio:

Kit di tubi in vetroKit di tubi in vetro1 pezzo

Strumenti necessari:

Cannello da vetraio da bancoCannello da vetraio da banco
Jacks (borselle da vetraio)Jacks (borselle da vetraio)
Marver (piano di rullatura del vetro)Marver (piano di rullatura del vetro)
Occhiali di sicurezzaOcchiali di sicurezza
Guanti resistenti al caloreGuanti resistenti al calore
2

Handle

Heat a spot below the rim opposite the spout and the end of a thick rod together, press the rod on, bend it round in a loop and fuse its lower end to the side.

Materiali per questo passaggio:

Bacchetta in vetro borosilicatoBacchetta in vetro borosilicato1 pezzo

Strumenti necessari:

Cannello da vetraio da bancoCannello da vetraio da banco
Guanti resistenti al caloreGuanti resistenti al calore
3

Anneal

Anneal the jug in the kiln at once and cool it slowly; a handle joint is where strain collects.

Strumenti necessari:

FornaceFornace
4

Mark it

Stand it on the balance, add water 50 g at a time and scratch a line at each level.

Materiali per questo passaggio:

AcquaAcqua1 litro

Strumenti necessari:

Bilancia a bracciBilancia a bracci
Punta da tracciatura diamantataPunta da tracciatura diamantata
5

Marks by weight

Caricamento del notebook Jupyter…

Materiali

3

Strumenti richiesti

8

Questo progetto realizza

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...