ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Grosgrain Ribbon: Close Plain Weave with a Heavy Weft
Grosgrain is a firm, closely woven plain weave with a heavier weft than warp, which gives it ribs running across the width. It is used for hat bands, facings and waistbands. Historically it was silk or wool; this one is cotton, woven narrow on a rigid heddle loom.
The picture: grosgrain ribbons (Wikimedia Commons).
Intermedio
Two evenings
Istruzioni
1
1
The thread and twine
The thread and twine
Spinning the fine warp thread and the heavier twine used as weft.
2
2
Measure the warp
Measure the warp
For a ribbon 2.5 cm wide and 3 m long, wind enough fine warp threads to fill 2.5 cm of the heddle, each 3.5 m long to allow for tying on and loom waste.
Materiali per questo passaggio:
Filo di ordito in cotone1 as requiredStrumenti necessari:
Orditoio a muro
Metro a nastro
Righello3
3
Thread the heddle
Thread the heddle
Centre the warp in the heddle, one end through each slot and each hole, wind on under even tension and tie on at the front.
Strumenti necessari:
Telaio a pettine rigido4
4
Weave with a heavy weft
Weave with a heavy weft
Wind the twine on the shuttle. Weave plain weave: one pass with the heddle up, one with it down, and beat each pick firmly so the weave is close and the heavy weft forms ribs across the ribbon.
Materiali per questo passaggio:
Spago di cotone1 as requiredStrumenti necessari:
Telaio a pettine rigido
Navetta5
5
Keep the edges straight
Keep the edges straight
Draw each pick snug at the edges so the ribbon keeps its width; measure the width often.
Strumenti necessari:
Righello6
6
Cut off and secure
Cut off and secure
Cut the ribbon off the loom and knot or stitch both ends so the weft cannot slip off.
Strumenti necessari:
Forbici da sarto7
7
Troubleshooting
Troubleshooting
Grosgrain troubleshooting.
Flow
Loading...
Materiali
2- 1 as requiredSegnaposto
- 1 as requiredSegnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.