ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Hard Soap Boiled from Tallow and Soda Lye, Framed and Wire-Cut, Ure 1839
Hard soap is tallow boiled with caustic soda lye; potash would give soft soap. Andrew Ure (1839): run the lye through soda and quicklime, boil the tallow with weak lye, draw the spent lye off and boil again with stronger lye day by day, then ladle the soap into a frame and cut it with a brass wire into bars. Caustic lye burns skin and eyes: goggles and gloves.
The picture: a bar of hard soap.
Intermedio
A week
Istruzioni
1
1
Run the lye
Run the lye
Fit a barrel with a perforated false bottom covered by cloth and a tap beneath, like Ure's vats. Put in a layer of quicklime, then alternate layers of ground soda ash and lime. Pour on water and draw off the clear caustic lye. Make some weak (hydrometer about 1.040) and some strong (up to 1.160).
Materiali per questo passaggio:
Carbonato di sodio (soda)2 kgStrumenti necessari:
Calce viva
Botte di legno
Panno (da colatura)
Acqua
Densimetro
Secchio metallico
Occhiali antispruzzo chimico
Guanti di gomma2
2
First boils
First boils
Melt the tallow in the cauldron, add weak lye and boil gently about 4 hours, stirring. Test on a knife blade: when the lye runs off the soapy paste at once, it has taken. Let it stand an hour and ladle off the spent lye beneath.
Materiali per questo passaggio:
Sego5 kgStrumenti necessari:
Grande calderone di ghisa
Legna da ardere
Pala di legno
Coltello da cucina
Mestolo
Bilancia a bracci
Occhiali antispruzzo chimico
Guanti di gomma3
3
Stronger lyes
Stronger lyes
Repeat with fresh lye, a little stronger each day, drawing the spent lye off each time, until the paste stays firm on cooling.
Strumenti necessari:
Grande calderone di ghisa
Legna da ardere
Pala di legno
Mestolo
Densimetro
Occhiali antispruzzo chimico
Guanti di gomma4
4
Frame and cut
Frame and cut
Skim the pan and ladle the soap into a wooden frame. After two days take the frame off, cut the block into slabs with a brass wire, then the slabs into bars, and stand them to harden.
Strumenti necessari:
Mestolo
Stampo per sapone
Filo di ottone sottile
Coltello da cucina
Guanti di gomma5
5
Soap from your tallow
Soap from your tallow
Caricamento del notebook Jupyter…
Strumenti richiesti
16- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.




