ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Hardwood Logs: Tree Felled with Notch and Back Cut, Limbed and Bucked
Woody

Creato da

Woody

14. ottobre 2026NO
19
0
0
0
0

Hardwood Logs: Tree Felled with Notch and Back Cut, Limbed and Bucked

Logs come from a felled tree. Cut a V-shaped notch on the side you want it to fall, then a back cut from the other side toward it; the strip left between them is the hinge that steers the fall. Then cut off the branches (limbing) and saw the trunk into logs (bucking). The picture: fallers on springboards beside a notched conifer, Clallam County, Washington, about 1905 (MOHAI 5981): the notch is the same on any tree.
Avanzato
A day

Istruzioni

1

Plan the fall

Choose a sound hardwood tree such as oak, maple or beech. Look at its lean and the wind, pick a clear line to fall it on, and clear two escape paths back and to the side.

Materiali per questo passaggio:

Albero - latifogliaAlbero - latifoglia1 pezzo

Strumenti necessari:

Casco da cantiereCasco da cantiere
2

Cut the notch

On the side of the fall, chop a V-shaped notch about a quarter of the way into the trunk (our choice). Its back line sets the direction.

Strumenti necessari:

AsciaAscia
Casco da cantiereCasco da cantiere
3

Back cut, leave the hinge

Saw in from the opposite side, a little above the bottom of the notch. Stop short, leaving a strip of wood uncut: the hinge. Tap a wedge into the cut to tip it. Walk away along your escape path as it goes.

Strumenti necessari:

Sega a due maniSega a due mani
Cuneo di abbattimento in legnoCuneo di abbattimento in legno
AsciaAscia
Casco da cantiereCasco da cantiere
4

Limb it

Cut the branches off flush with the trunk, working from the base toward the top, standing on the other side of the trunk from the branch.

Strumenti necessari:

AsciaAscia
Casco da cantiereCasco da cantiere
5

Buck into logs

Mark the lengths you need with the chalk line and saw the trunk through at each mark. Prop the trunk so the cut opens and does not pinch the saw.

Strumenti necessari:

Sega a due maniSega a due mani
Filo tracciatoreFilo tracciatore
Cuneo di abbattimento in legnoCuneo di abbattimento in legno
6

How much wood is in the logs

Caricamento del notebook Jupyter…
7

Limits

Notch, back cut, hinge, limbing and bucking follow Wikipedia's account of tree felling; the notch depth is ours. A falling tree kills: fell only trees you are able to, with no one inside two tree-lengths.

Materiali

1

Strumenti richiesti

5

Blueprint correlati

Questi blueprint condividono conoscenze — tecniche, materiali o principi

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...