ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Leather Strop: a Beech Paddle Faced with Leather on Both Sides
A strop is a strip of leather that straightens the fine edge of a blade after the stone; with an abrasive such as iron oxide rubbed in, it also polishes a little. Strops hang, sit as blocks, or come as hand-held paddles. Glue leather to both faces of a beech paddle, smooth side out on one face and rough side out on the other, and charge the rough side with red iron oxide.
The picture: our diagram, the paddle from above and in section, with a blade drawn spine first.
Principiante
An afternoon
Istruzioni
1
1
Shape the paddle
Shape the paddle
Saw and plane a beech paddle about 40 × 6 × 1.5 cm with a 10 cm handle (our size), and round the handle with the spokeshave.
Materiali per questo passaggio:
Legname di faggio1 pezzoStrumenti necessari:
Sega a mano
Pialla a mano
Pialletto a due manici2
2
Cut the leather
Cut the leather
Cut two strips of leather to the blade area of the paddle.
Materiali per questo passaggio:
Cuoio conciato al vegetale1 pezzoStrumenti necessari:
Taglierino
Righello3
3
Glue them on
Glue them on
Glue one strip smooth (grain) side out on one face and the other rough (flesh) side out on the other face with hot hide glue, and clamp flat until set.
Materiali per questo passaggio:
Colla di pelle0.05 kgStrumenti necessari:
Morsetto a C
Pentola grande (inferiore, per il bagnomaria)
Becher di vetro4
4
Charge the rough side
Charge the rough side
Rub red iron oxide (red ochre) into the rough side. Strop by drawing the blade spine first, edge trailing (our practice), with light, even strokes on each side.
Materiali per questo passaggio:
Pigmento di ocra rossa0.01 kgStrumenti necessari:
Taglierino5
5
Leather for the paddle
Leather for the paddle
Caricamento del notebook Jupyter…
Materiali
4- 1 pezzoSegnaposto
- 1 pezzoSegnaposto
- 0.05 kgSegnaposto
- 0.01 kgSegnaposto
Strumenti richiesti
8- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

