ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Linen Fabric Woven in Plain Weave on a Treadle Loom
Linen is cloth woven from flax fibre: very strong, absorbent, quick to dry and cool to the touch, and among the oldest textiles; Egyptian mummies were wrapped in it. Weave linen thread in plain weave on the treadle loom, each weft over one warp thread and under the next.
The picture: linen cloths in a textile museum drawer.
Intermedio
A week
Istruzioni
1
1
Warp the loom
Warp the loom
Measure the warp (step 5), thread the ends alternately through the two shafts' heddles and through the reed, and wind it on the back beam under even tension. Mist the warp with water now and then; dry linen frays (ours).
Materiali per questo passaggio:
Filo di lino1560 mStrumenti necessari:
Telaio a pedali
Righello
Forbici
Spruzzino ad acqua
Acqua2
2
Weave
Weave
Press one treadle, throw the shuttle through the shed, beat with the reed; press the other treadle and throw it back. Lay each pick in at a slant so the edges do not draw in.
Materiali per questo passaggio:
Filo di lino1320 mStrumenti necessari:
Telaio a pedali
Navetta3
3
Advance
Advance
Wind the woven cloth onto the front beam as you go, keeping the beat even so the picks per cm stay the same.
Strumenti necessari:
Telaio a pedali
Righello4
4
Cut off
Cut off
Weave to the end of the warp, cut the cloth off and knot the warp ends in groups so the weft cannot unravel.
Strumenti necessari:
Forbici5
5
Thread for the cloth
Thread for the cloth
Caricamento del notebook Jupyter…
Materiali
1- 2880 mSegnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.



