ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Magnifying Glass from a Hand-Ground Lens
A magnifying glass is a convex lens in a frame with a handle. A typical one has a focal length of 25 cm, an optical power of 4 dioptres, and is sold as "2×": its magnifying power is 0.25 m × 4 + 1 = 2 for an eye whose near point is 25 cm. Here the lens is ground plano-convex from crown glass (refractive index about 1.52). For a plano-convex lens the focal length is R / (n − 1), so a 25 cm focal length needs a curve of radius about 13 cm. The lens is then set in a turned wooden ring with a handle; those sizes are ours.
Avanzato
2–3 days
Istruzioni
1
1
Grind the lens
Grind the lens
Following the lens-grinding blueprint, grind one face of a glass disc to a spherical curve of about 13 cm radius, working down through the grits, then polish it clear with cerium oxide on a pitch lap. Leave the other face flat.
Materiali per questo passaggio:
Lastra di vetro1 pezzo
Colla di pece di pino100 gStrumenti necessari:
Righello
Ossido di cerio per lucidatura2
2
Check the focus
Check the focus
Hold the lens in sunlight and move a card behind it until the spot is smallest; the distance from lens to card is the focal length and should be close to 25 cm. Do not look at the Sun through it.
Strumenti necessari:
Righello3
3
Turn the frame
Turn the frame
Turn a ring from a hardwood blank with a groove on the inside just wider than the lens edge, and part it off.
Materiali per questo passaggio:
Blocco di legno duro1 pezzoStrumenti necessari:
Tornio per legno
Sgorbia
Utensile da troncare4
4
Turn the handle
Turn the handle
Turn a handle from a hardwood dowel and fix it into a hole drilled in the ring.
Materiali per questo passaggio:
Tasselli di legno duro1 pezzo
Resina epossidica bicomponente5 mlStrumenti necessari:
Tornio per legno5
5
Set the lens
Set the lens
Saw the ring through at the handle, spring the lens into the groove, glue the cut closed and wax the wood.
Materiali per questo passaggio:
Cera d'api10 gMateriali
6- 1 pezzoSegnaposto
- Segnaposto
- 1 pezzoSegnaposto
- 1 pezzoSegnaposto
- Segnaposto
- 10 gSegnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

