ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Mud Plaster: Clay, Sand and Straw Trodden Together and Laid On
Mary

Creato da

Mary

17. ottobre 2026FI
8
0
0
0
0

Mud Plaster: Clay, Sand and Straw Trodden Together and Laid On

Mud plaster is clay to bind, sand for bulk and straw to hold it together and stop it cracking as it dries. Mix them with water by hand or by treading, lay it on the wall, and let it dry; add a second coat if needed. The picture: our diagram, a wall with its straw-filled mud coat.
Principiante
A day, then drying

Istruzioni

1

Soak the clay

Break the clay up in the trough, cover it with water and leave it to soften overnight.

Materiali per questo passaggio:

ArgillaArgilla100 kg

Strumenti necessari:

Vasca da impastoVasca da impasto
VangaVanga
SecchioSecchio
AcquaAcqua
2

Mix

Add sand and work it in with the hoe, then add chopped straw by handfuls and tread or knead it until the straw is spread through and the mix is stiff but sticky.

Materiali per questo passaggio:

SabbiaSabbia100 kg
Paglia trinciataPaglia trinciata5 kg

Strumenti necessari:

ZappaZappa
Vasca da impastoVasca da impasto
3

Lay on

Wet the wall, throw or press the plaster on about 2 cm thick and smooth it. Let it dry, then add a thinner second coat over any cracks.

Strumenti necessari:

CazzuolaCazzuola
SecchioSecchio
AcquaAcqua
4

Plaster for your wall

Caricamento del notebook Jupyter…

Materiali

3
  • 100 kg
    Segnaposto
  • 100 kg
    Segnaposto
  • Segnaposto

Strumenti richiesti

6

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...