Collaborazione
ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Oven: Insulated Electric Oven with Plug-In Grid Heaters and a Thermostat (Ogden, US 987,161, 1911)
An electric oven built to waste as little heat as possible: a double-walled, packed box with a packed door that seals like a strong-room door. Grid-shaped heating elements slide into grooves in the walls and plug into sockets at the back, and the food rests on them. A thermostat cuts the current when the set temperature is reached and switches it on again as the oven cools.
Result: an oven that bakes, roasts or dries at a set temperature with any number of heating grids.
Source: G. J. Ogden, US 987,161 (1911). Unknown: sizes, metals, packing and temperatures. Picture: the patent drawing.
Avanzato
Unknown
Istruzioni
1
1
Build the insulated casing and door
Build the insulated casing and door
Make the oven chamber as a double-walled casing with packing between the walls, and grooves on the inner side walls to take the heating grids. Fit a door that closes like a fire-proof vault door, also packed, so the casing seals closely. Ours: mild steel sheet. Not given: sizes, the packing.
Materiali per questo passaggio:
Lamiera di acciaio dolce1 inner and outer walls, door
Materiale isolante sconosciuto1 packingStrumenti necessari:
Cesoie da lattoniere
Trapano a colonna
Dimensioni sconosciute2
2
Make the plug-in heating grids
Make the plug-in heating grids
Make heating elements in the form of grids that slide into the grooves and on which the food can rest. Fix a porcelain plug to each, carrying spring fingers that push into a socket with matching spring fingers in the back wall. Wire the sockets so all the elements are in parallel; use as many as the temperature and amount of food need. Ours: nichrome wire. Not given: the element type.
Materiali per questo passaggio:
Filo di nichel-cromo1 heating grids
Materiale sconosciuto1 porcelain plugs and sockets
Filo di acciaio armonico1 spring fingers
Filo per cablaggio1 circuit wiringStrumenti necessari:
Saldatore a stagno3
3
Fit the thermostat control
Fit the thermostat control
Put a thermostat that bends with heat inside the oven, working a contact finger that plays between two contacts a few degrees above and below the set temperature. A switch-changing device, a small rotary motor, throws the main switch off and on as the finger touches one contact or the other. Mount a setting arm with a pointer over a scale marked in degrees, and a second pointer driven by the thermostat. Add a hand switch to turn the current on or off independently, and a lamp with its own switch to light the oven. Ours: a bimetal strip, toggle switches. Not given: temperatures.
Materiali per questo passaggio:
Lamina bimetallica1 thermostat
Motore elettrico1 switch-changing motor
Interruttore a levetta3 main, hand and lamp switches
Metallo sconosciuto1 contacts, arm, scaleMateriale sconosciuto1 incandescent oven lampStrumenti necessari:
Saldatore a stagno
TermometroMateriali
10- 1 inner and outer walls, doorSegnaposto
- 1 packingSegnaposto
- 1 heating gridsSegnaposto
- 1 incandescent oven lampSegnaposto
- 1 spring fingersSegnaposto
- Segnaposto
- 1 thermostatSegnaposto
- 1 switch-changing motorSegnaposto
- Segnaposto
- 1 contacts, arm, scaleSegnaposto
Strumenti richiesti
5- Segnaposto
- Segnaposto
- Segnaposto
- 2 vendors sell this, none ship to you yetSegnaposto
- Segnaposto
Materiali dei progetti collegati
Questo progetto realizza
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.