Collaborazione
ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Perforated Screen Plate: Clear- or Buhr-Punched Steel Plate (Richards, Ore Dressing, 1903)
The punched steel screens of ore mills: round holes or slots punched through steel plate, either 'clear punched' with a sharp square-edged tool that cuts out a wad, or 'buhr punched' with a thicker tool that tears the metal over a socket in the die.
Clear punching suits holes of 0.03 inch and up; buhr punching suits fine holes of 0.02 inch and less, because a thicker plate can be used. Holes in rows at 60° give 1.154 times the open area of rows at 90°.
Unknown: the plate thickness and hole spacing for a given screen.
Source: R. H. Richards, Ore Dressing vol. I (1903), pp. 167-168. Picture: p. 167 with Figs. 117 and 118.
Intermedio
Unknown
Istruzioni
1
1
Choose the holes
Choose the holes
For coarse work use round holes of 0.04 inch (1 mm) and up; for medium work about 0.03 inch (0.75 mm), clear punched. For fine work, 0.02 inch (0.5 mm) and less, buhr punch, so a thicker plate can be used. The smallest practical clear-punched hole is about 0.014 inch (0.35 mm) wide: a hole much narrower than the plate is thick breaks the punch (the extreme Richards found was a slot 54 per cent of the thickness).
Materiali per questo passaggio:
Lamiera d'acciaio1 steel plate
Dimensioni sconosciute1 pezzoStrumenti necessari:
Pressa punzonatrice2
2
Lay out the holes
Lay out the holes
Set round holes in rows at 60° or 90°; with the same hole and spacing, 60° rows give 1.154 times the open area. Punch slots vertical, diagonal or horizontal, in line or staggered; staggering spreads the punching strain.
Strumenti necessari:
Pressa punzonatrice3
3
Punch the plate
Punch the plate
Clear punching: a tool with a square, sharp edge cuts out a wad exactly the size and shape of the hole. Buhr punching: a thicker tool presses the plate, lying on a socket in the die, just deep enough to tear the metal apart.
Strumenti necessari:
Pressa punzonatriceMateriali
2- 1 steel plateSegnaposto
- 1 pezzoSegnaposto
Questo progetto realizza
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.