ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Pins in Eighteen Operations: Adam Smith's Pin Factory
In 1776 Adam Smith opened The Wealth of Nations with a pin workshop. One untrained worker, he wrote, "could scarce, perhaps, with his utmost industry, make one pin in a day, and certainly could not make twenty". Split into about eighteen distinct operations, ten men in a poorly equipped workshop made about twelve pounds of pins a day, at upwards of four thousand middling pins to the pound: over 48,000 pins, or 4,800 per worker. The operations are the blueprint: draw the wire, straighten, cut, point, grind the top, make and fix the head, whiten, and paper. Pins were long made of brass before steel took over, so here the wire is drawn from brass.
Intermedio
Workshop process
Istruzioni
1
1
Draw out the wire
Draw out the wire
Draw the brass down through the holes of the drawplate to pin thickness.
Materiali per questo passaggio:
Barra di ottone1 as requiredStrumenti necessari:
Filiera d'acciaio2
2
Straighten and cut
Straighten and cut
Straighten the wire, then cut it into pin lengths.
Strumenti necessari:
Tronchesine3
3
Point
Point
Point one end of each length.
4
4
Prepare the top and head it
Prepare the top and head it
Grind the other end to receive the head. Making the head takes two or three separate operations, and putting it on is a trade of its own.
Strumenti necessari:
Mola ad acqua5
5
Whiten and paper
Whiten and paper
Whiten the pins, then put them into the paper, which Smith calls "a trade by itself".
Materiali
1- 1 as requiredSegnaposto
Strumenti richiesti
3- Segnaposto
- Segnaposto
- Segnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.



