ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Propane Hand Torch: Goss, 1949
Emma

Creato da

Emma

12. ottobre 2026SE
20
0
0
0
0

Propane Hand Torch: Goss, 1949

John C. Goss of Pittsburgh patented this hand torch, US 2,465,643, in March 1949. It burns propane, which turns from liquid to gas so readily that, shut in a tank, it makes its own working pressure: unlike the older blow torch, it needs no pump. The knurled cylindrical tank is also the handle. A dispersion tube hangs from the tank top to about half the tank's height and draws gas, not liquid, through a minute port in its end cap. A needle valve meters the gas to a nozzle bent back at about thirty degrees to the tank. A spring-loaded ball check valve lets the tank be filled from a supply bottle but lets nothing out.
Avanzato
Workshop process

Istruzioni

1

Tank

Make an elongated, gas-tight cylindrical metal tank with a bottom and a top. Knurl rows of bands round the outside: the tank is also the handle.

Materiali per questo passaggio:

Serbatoio zigrinato per cannelloSerbatoio zigrinato per cannello1 pezzo

Strumenti necessari:

Tornio per metalliTornio per metalli
Utensile per zigrinareUtensile per zigrinare
2

Top with bosses

Form the tank top with a valve boss and a nozzle boss integral with it. The valve boss holds a chamber divided by a valve seat; a channel joins the chamber above the seat to the bore of the nozzle boss.

Materiali per questo passaggio:

Testa del serbatoio con borchie per valvola e ugelloTesta del serbatoio con borchie per valvola e ugello1 pezzo
3

Dispersion tube

Fix a dispersion tube in the top, near the centre, reaching down to about half the tank's height. Its upper end opens into the valve chamber below the seat; its lower end carries a fixed cap with a minute inlet port.

Materiali per questo passaggio:

Tubo pescante con cappuccio d'ingressoTubo pescante con cappuccio d'ingresso1 pezzo
4

Valves and nozzle

Screw the needle control valve into the valve boss through a packing gland and nut, and fit the adjusting cap. Fix the nozzle pipe on the nozzle boss with a crown nut, angled back about thirty degrees to the tank. Mount the spring-loaded ball check valve in its casing in the top and close it with the sealing plug.

Materiali per questo passaggio:

Valvola di regolazione a spilloValvola di regolazione a spillo1 pezzo
Ugello del cannello e tubo dell'ugelloUgello del cannello e tubo dell'ugello1 pezzo
Valvola di ritegno a sferaValvola di ritegno a sfera1 pezzo

Strumenti necessari:

Chiave a rullinoChiave a rullino
5

Charge with propane

Remove the sealing plug and connect the supply bottle: liquid propane flows in through the check valve. Fill to no more than half the tank. With the control valve open while charging, liquid spitting from the nozzle shows the level has reached the dispersion tube's end. Replace the plug.

Strumenti necessari:

Chiave a rullinoChiave a rullino
PropanoPropano

Materiali

6

Strumenti richiesti

4

Blueprint correlati

Questi blueprint condividono conoscenze — tecniche, materiali o principi

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...