ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Spring Steel Strip and Wire, Hardened and Tempered
Forge

Creato da

Forge

11. ottobre 2026NO
40
0
0
0
0

Spring Steel Strip and Wire, Hardened and Tempered

A spring must bend and come back. Mild steel bends and stays bent; high-carbon steel, hardened and then tempered to a blue colour, springs back. The strip or wire is shaped soft, heated until a magnet no longer sticks to it, quenched in warm oil to harden it, then tempered: cleaned bright and heated gently until the colour runs to blue. It starts from high-carbon crucible steel. Wire is drawn while the steel is still annealed.
Avanzato
A day

Istruzioni

1

Forge strip

Forge crucible steel at a yellow heat into strip, smoothing it with the flatter; never work it below red. Cut it to length while hot.

Materiali per questo passaggio:

Acciaio al crogioloAcciaio al crogiolo1 kg
Carbone di legnaCarbone di legna10 kg

Strumenti necessari:

Forgia da fabbroForgia da fabbro
IncudineIncudine
Martello da fabbroMartello da fabbro
Spianatoio da fabbroSpianatoio da fabbro
Tenaglie da fabbroTenaglie da fabbro
Grembiule di cuoioGrembiule di cuoio
Guanti da saldatoreGuanti da saldatore
Occhiali di sicurezzaOcchiali di sicurezza
2

Anneal

Heat to a dull red and bury it in dry wood ash to cool slowly overnight.

Materiali per questo passaggio:

Cenere di legno duroCenere di legno duro2 kg

Strumenti necessari:

Secchio metallicoSecchio metallico
3

Draw wire

For wire, forge a rod, anneal it, and draw it through the drawplate with wax, annealing after every hole. Coil or bend the springs now, while it is soft.

Materiali per questo passaggio:

Cera d'apiCera d'api10 g

Strumenti necessari:

Filiera d'acciaioFiliera d'acciaio
Tenaglie da tiraggioTenaglie da tiraggio
Morsa da bancoMorsa da banco
4

Harden

Heat the part evenly until a magnet no longer sticks, then plunge it into a lidded bucket of warm rapeseed oil and stir it. Keep the lid at hand for flare-ups.

Materiali per questo passaggio:

Olio di colzaOlio di colza5 litri

Strumenti necessari:

Forgia da fabbroForgia da fabbro
MagneteMagnete
Secchio metallico con coperchioSecchio metallico con coperchio
Tenaglie da fabbroTenaglie da fabbro
Guanti da saldatoreGuanti da saldatore
5

Clean bright

Sand a stripe bright on the hardened steel so you can see the temper colours.

Strumenti necessari:

Foglio di carta abrasivaFoglio di carta abrasiva
6

Temper to blue

Heat it gently and evenly with the torch on fire bricks, or on a hot plate of steel, and watch the colours run straw, bronze, purple, blue. Stop at an even blue and let it cool.

Strumenti necessari:

Cannello a propanoCannello a propano
Mattone refrattarioMattone refrattario
Tenaglie da fabbroTenaglie da fabbro
7

Test

Clamp one end in the vise and bend the free end a little: it must spring back straight.

Strumenti necessari:

Morsa da bancoMorsa da banco
Calibro digitale da 6 polliciCalibro digitale da 6 pollici
8

Troubleshooting

Spring tempering troubleshooting.

Flow

Loading...

Materiali

5

Strumenti richiesti

18

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...