ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered
Forge

Creato da

Forge

18. ottobre 2026NO
10
0
0
0
0

Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered

Needles are made from good steel wire: cut, straightened, pointed, flattened and pierced for the eye, hardened by heating and plunging into oil, then tempered back to a springy hardness, scoured and polished (Bucknall Smith, A Treatise upon Wire, 1891). This is the same sequence by hand, one heavy needle at a time from piano wire; the hand methods and sizes are ours. The picture: steel sewing needles (Wikimedia Commons).
Intermedio
Half a day

Istruzioni

1

Cut, soften and straighten

Cut 70 mm of 1.2 mm piano wire. Heat it to red in the forge and let it cool slowly in the ashes so it can be filed and drilled, then roll it straight on the anvil.

Materiali per questo passaggio:

Corda armonicaCorda armonica70 mm

Strumenti necessari:

TronchesineTronchesine
Forgia da fabbroForgia da fabbro
Pinza a becchi lunghiPinza a becchi lunghi
IncudineIncudine
2

Point

Clamp it in the vise and file a long, even taper to a sharp point, turning the wire as you go.

Strumenti necessari:

Serie di limeSerie di lime
Morsa da bancoMorsa da banco
Occhiali di sicurezzaOcchiali di sicurezza
3

Flatten and pierce the eye

Flatten the head end slightly on the anvil, drill the eye through the flat with the finest bit, then file off the burrs and round the head.

Strumenti necessari:

IncudineIncudine
Martello a penna trasversaleMartello a penna trasversale
Trapano a manoTrapano a mano
Serie di limeSerie di lime
Morsa da bancoMorsa da banco
Occhiali di sicurezzaOcchiali di sicurezza
4

Harden in oil

Heat the needle evenly to red and plunge it into the oil. It is now glass-hard and brittle.

Strumenti necessari:

Forgia da fabbroForgia da fabbro
Pinza a becchi lunghiPinza a becchi lunghi
Vasca di tempra a olioVasca di tempra a olio
Occhiali di sicurezzaOcchiali di sicurezza
5

Temper

Reheat it in the oven to about 600 °F (315 °C) and let it cool slowly to a springy temper. If it came out crooked, straighten it with light blows of a small hammer on the anvil.

Strumenti necessari:

Forno per trattamenti termiciForno per trattamenti termici
Termocoppia con lettoreTermocoppia con lettore
IncudineIncudine
Martello a penna trasversaleMartello a penna trasversale
6

Scour and polish

Scour it bright with emery cloth, a little oil and soap. Wash it in hot water, dry it in sawdust, touch up the point, and polish it on the leather strop.

Strumenti necessari:

Tela smeriglioTela smeriglio
Olio d'olivaOlio d'oliva
SaponeSapone
SegaturaSegatura
CoramellaCoramella
Serie di limeSerie di lime

Materiali

1

Strumenti richiesti

17

Questo progetto realizza

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...