ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Sterling Silver Wire: 925 Silver to 75 Copper, Cast and Drawn
Sterling silver is 925 parts silver to 75 parts copper. Fine silver alone is generally too soft for working objects, so it is alloyed with copper for strength (Wikipedia, Sterling silver). Melted together, cast in a bar and drawn down through a drawplate, it becomes wire.
The picture: a silversmith drawing silver wire for jewellery, Trinidad, 1930s.
Avanzato
A day
Istruzioni
1
1
Weigh
Weigh
Weigh fine silver and copper in the ratio 925 to 75 (see the notebook).
Materiali per questo passaggio:
Argento fino92.5 g
Lingotto di rame7.5 gStrumenti necessari:
Bilancia a bracci2
2
Melt and cast
Melt and cast
Melt the silver in a crucible with a pinch of borax, add the copper and stir until one even liquid, then pour into a warmed ingot mould as a thin bar.
Materiali per questo passaggio:
Borace in polvere1 as required
Carbone di legna1 as requiredStrumenti necessari:
Crogiolo grafite-argilla
Forno a carbone di legna
Tenaglia per crogiolo
Lingottiera
Guanti resistenti al calore3
3
Draw the wire
Draw the wire
Hammer the bar round, file a taper and draw it hole by hole through the drawplate, annealing to a dull red with the torch whenever it stiffens, as copper wire is drawn.
4
4
Weighing sterling
Weighing sterling
Caricamento del notebook Jupyter…
Materiali
4- 92.5 gSegnaposto
- 7.5 gSegnaposto
- 1 as requiredSegnaposto
- 1 as requiredSegnaposto
Strumenti richiesti
6- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.


