Collaborazione
ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Veneer Hammer: an Iron Strip Set in a Wooden Head (Work, 1889)
The veneering hammer does not strike: it is drawn over glued veneer like a squeegee, pressing it down. David Adamson (1889) says it is hardly worth buying, as anyone can make one: a strip of iron 3 to 6 inches long set in a wooden head with a handle, its edge projecting, straight, and smoothly rounded.
Shape and size do not matter much; it must be strong, the iron thick enough not to bend, and the edge smooth.
Source: D. Adamson, 'Practical Veneering', Work, 5 October 1889, p. 453. Picture: his Fig. 1.
Principiante
Unknown
Istruzioni
1
1
Read Adamson
Read Adamson
"A strip of iron of, say, from 3 in. to 6 in. long and of any convenient width is firmly fixed between two pieces of wood, or in a groove cut in one piece to form the head. In this a handle is inserted. The precise shape and size of any part are quite immaterial, the principal points to be observed being strength and convenience."
2
2
Cut the iron strip
Cut the iron strip
Cut a strip of iron 3 to 6 in. long and of any convenient width, thick enough not to bend when the hammer is pressed hard. Its thickness is not given (unknown). Ours: cut from iron plate with a hacksaw.
Materiali per questo passaggio:
Lastra di ferro1 strip 3-6 in.Strumenti necessari:
Seghetto per metalli
Dimensioni sconosciute3
3
Make the head
Make the head
Cut a groove in a block of wood and fix the strip firmly in it, with its edge projecting beyond the wood (or fix it between two pieces of wood). Fit a handle into the head. The wood, and how the strip and handle are fixed, are not given (unknown). Ours: a hardwood block, the groove sawn.
Materiali per questo passaggio:
Blocco di legno duro1 head
Manico per attrezzi1 pezzo
Connettore sconosciuto1 pezzoStrumenti necessari:
Saracco a costola4
4
Round the edge
Round the edge
File the projecting iron edge straight, smooth and rounded so it passes freely over the veneer, and slightly round off its lower corners so they do not damage the veneer. The smoother the edge, the easier the tool is to use.
Strumenti necessari:
Lime (lima a mano)Materiali
4- 1 strip 3-6 in.Segnaposto
- 1 headSegnaposto
- 1 pezzoSegnaposto
- 1 pezzoSegnaposto
Strumenti richiesti
4- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
Questo progetto realizza
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.