ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Woven Wire Cloth on a Wire Loom
Wire mesh, or wire gauze, is cloth woven from metal wire on a loom much like a textile loom. Warp wires run the length of the cloth; a shuttle, or in later looms sliding carriers, takes the weft wire across through the shed, and the lathe (beater) knocks it up to the fell of the cloth, twice in hand weaving. Fine wire is soft and easily kinked, so the shed is kept low to avoid straining the warp. Mesh is named by its count, historically the number of openings per inch.
Avanzato
Factory process
Istruzioni
1
1
Warp the loom
Warp the loom
Set the warp wires side by side at the spacing for the mesh count.
Materiali per questo passaggio:
Filo di acciaio inox1 as requiredStrumenti necessari:
Telaio per tela metallica2
2
Open a low shed
Open a low shed
Lift and lower alternate warp wires to open a shed, kept low so the warp is not strained.
Strumenti necessari:
Telaio per tela metallica3
3
Pass the weft
Pass the weft
Carry the weft wire across through the shed with the shuttle.
Strumenti necessari:
Telaio per tela metallica4
4
Beat up
Beat up
Bring the lathe forward to beat the weft wire up to the fell; repeat shed, weft and beat for every wire.
Strumenti necessari:
Telaio per tela metallicaMateriali
1- 1 as requiredSegnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.



