ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Writing Paper: Rag Sheets Sized and Hot-Pressed Smooth
A pen needs paper that does not let ink spread: sized, so the ink stays on top, and smooth, so the nib does not catch. Andrew Ure (1839) gives both: hand-made rag sheets dipped in gelatine size, then hot-pressed between smooth pasteboards and heated iron plates, "which communicates a fine smooth surface to writing-paper".
The picture: the drying loft of an 18th-century paper mill, sheets hung on lines (Diderot's Encyclopédie).
Intermedio
About a week with drying
Istruzioni
1
1
Size the sheets
Size the sheets
Melt hide glue in water with a little alum to a thin, warm size. Spread a few dry, unsized rag sheets in it at a time so each is wetted evenly.
Materiali per questo passaggio:
Carta50 fogli
Colla di pelle100 g
Allume (allume di potassio)10 g
Acqua2 litriStrumenti necessari:
Bollitore in ghisa
Tino2
2
Press and dry slowly
Press and dry slowly
Press out the spare size between felts, part the sheets, press again and hang them to dry slowly (Ure allowed three days).
Strumenti necessari:
Foglio di feltro di lana
Pressa per carta (a libro)
Filo per essiccare3
3
Hot-press
Hot-press
Stack the dry sheets, each between two smooth pasteboards, with a heated iron plate in the pile, and press it hard. The heat and pressure give the smooth writing surface.
Strumenti necessari:
Cartone accoppiato
Lastra di ferro
Piastra riscaldante
Pressa per carta (a libro)Materiali
4- 50 fogliSegnaposto
- 100 gSegnaposto
- Segnaposto
- 2 litriSegnaposto
Strumenti richiesti
8- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.




